Jump to content
SAU Community

Infringement Notice

Coolduck_69

By Coolduck_69,
in Victoria

 Share

Recommended Posts

Coolduck_69 Apprentice

Coolduck_69

Posted
  • Author
Posted

fair enough having the neon wasnt a good idea, but i thought this was meant to be a commuity where people could talk about stuff without getting shot. i mean if you have issues with people having neons i tink you should keep it to yourself in future. advice and information would be more helpful for people that are learning this kind of thing first hand and first time round.

**RB2530** Proficient

**RB2530**

Posted
Posted

I was thinking about getting some neons but not anymore...Looks like the police and RTA have woken up to the extreme gains that neons can give...I didn't think it would take long.. :blink:

I was gonna get green ones for the 48% extra rear wheel horsepower, light grey ones for the handling (halve your lap time on any circuit) and some bright blue ones so I can run my car on E10 without it pinging (do my bit for the energy crisis)...Was also gonna get some super extreme white ones and hook them up to my flux capacitor and fire it up every time I went past a speed camera so all they see is white flash...(donate my savings in fines to neon research)

I also heard that the neonium fluid that the neons give out reduce the air density in the front of the car and this can take 3 seconds off your 1/4 mile ET...can anyone else confirm this?? I reckon more like 2.8 seconds...

**RB2530** Proficient

**RB2530**

Posted
Posted
fair enough having the neon wasnt a good idea, but i thought this was meant to be a commuity where people could talk about stuff without getting shot. i mean if you have issues with people having neons i tink you should keep it to yourself in future. advice and information would be more helpful for people that are learning this kind of thing first hand and first time round.

oops sorry dude, I am actually pro-neon...

**RB2530** Proficient

**RB2530**

Posted
Posted

I believe you should take it to court....You should claim that it was a christmas decoration instead.. :blink:

Tell the magistrate you are sick of people not respecting christmas and you were just trying to instill some christmas cheer into todays modern depressed society...

open and shut case i reckon....

Wyseman Community Regular

Wyseman

Posted
Posted
Neons are okay under these conditions:

1) When they spell out the word "Open" in a fish & chip shop window.

2) When they are part of a bad movie about Japanese cars.

I'm sure #1 is ok. Only about 12% sure on #2.

:blink:

DogKnight Mentor

DogKnight

Posted
Posted
1) When they spell out the word "Open" in a fish & chip shop window.

2) When they are part of a bad movie about Japanese cars.

I'm sure #1 is ok. Only about 12% sure on #2.

:ermm:

Okay okay, you got me.

xRHETTx Mentor

xRHETTx

Posted
Posted

Have a look at the VicRoads website linked below - it has all the info you need about the legality of neons (and most other things including BOVs)

http://www.vicroads.vic.gov.au/Home/RulesS...rdsInformation/

I'm sorry that you got a bad reaction from some of the people on the forum, but I know one of the main annoyances on this forum is people whinging about the cops when they have blatently broken the law.

Its very easy to check if neons are legal, and you should have done it before spending the money and putting them on your car...

W0rp3D Grand Master

W0rp3D

Posted
Posted (edited)
As for the neons, serves you right for having them in the first place :blink:
1) When they spell out the word "Open" in a fish & chip shop window.

2) When they are part of a bad movie about Japanese cars.

I'm sure #1 is ok. Only about 12% sure on #2.

:)

I expected a lot more replies suggestion that people who have neons are attracted to the same sex (all hot girls should have half neons :D )

Edited by W0rp3D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • PranK
      2001 R34DE

      By PranK · Posted

      Bloody apprentices! 🙄
×
×
  • Create New...