Jump to content
SAU Community

Recommended Posts

hi i have a RB25DET and it is stock really. and i was thinking about replacing the turbo with a supercharger like the ones that they use in the holden LS supercharger upgrades that u can get. and it would be nice to know if any body else has put a supercharger on, if it will work, what i will need, and what do i expect to get out of it.

im looking a supercharging it because as i understand it a turbo restricts the exhaust and has two turbines one to power the other which will lower the efficiency of the turbo especially in low rpm were as supercharger will be powered by a belt and is most likely to be more efficient.

if i am way of track then plz tell me

and yes i have seen

http://www.skylinesaustralia.com/forums/Su...er+turbocharger

i am looking a the performance between a turbocharger and a supercharger and also the price difference and what is needed for a upgrade

Link to comment
https://www.sau.com.au/forums/topic/246180-supercharger/
Share on other sites

a supercharger is basically a boring version of a turbocharger.

its good for low down power but the top end is no where near as fun.

it takes power from the crank and uses that to suck in air and force it in

a turbo uses exhaust gasses that are already there.

get in a car with a real turbo and see what you think :ermm:

Link to comment
https://www.sau.com.au/forums/topic/246180-supercharger/#findComment-4280062
Share on other sites

if you really wanna make it worthwhile it from the ground up with a 3lt bottom end stroker kit, twin turbo and a centrifugal supercharger running into a positive displacement supercharger :ermm:

hope you brought your wallet

Link to comment
https://www.sau.com.au/forums/topic/246180-supercharger/#findComment-4280156
Share on other sites

a friend of mine had a supercharged rb25/30 in his vl commy. The amount of time and money it cost was really not worth it. Basically everything needed to be custom made and fabricated, even down to the supercharger. Dont get me wrong, the car went really well, but its a lot cheaper and easier to upgrade the turbo on an rb25

Depends on how much your willing to spend to be different

Link to comment
https://www.sau.com.au/forums/topic/246180-supercharger/#findComment-4280459
Share on other sites

im looking a supercharging it because as i understand it a turbo restricts the exhaust and has two turbines one to power the other which will lower the efficiency of the turbo especially in low rpm were as supercharger will be powered by a belt and is most likely to be more efficient.

if i am way of track then plz tell me

Incorrect, a turbocharger is more efficient because it is using something from the engine to make power which is not being used for anything else ie. exhaust gases.

Edited by PM-R33
Link to comment
https://www.sau.com.au/forums/topic/246180-supercharger/#findComment-4280886
Share on other sites

Some people were all into doing this on their N/A VL's 3 or 4 years ago, basically isn't worth it for the cost, especially on a small displacement motor. Their usefulness on V8s is even being brought into question with the proliferation of reletively cheap off the shelf turbo kits floating around these days.

Link to comment
https://www.sau.com.au/forums/topic/246180-supercharger/#findComment-4281074
Share on other sites

i ran a torana at speedway many yrs ago that run a gm 471 blower with a ait split pulse t4 turbo blowing into the top of the blower .

it was awseome to drive the blower got it of the line like a cat with deep heat on it;s balls and the turbo kept enough air into it down the straights . it was a old 186 block with a 221 falcon crank with a alloy phill irvin head and mechanical endlee methanol injection .

got 3 seasons out of that set up b4 it dropped the crank out of the block every thing was custom made and cost a mint back then but you could not buy anything off the shelf . won many a race beating 350 powered cars i loved it lol

Link to comment
https://www.sau.com.au/forums/topic/246180-supercharger/#findComment-4281971
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...