Jump to content
SAU Community

18" Nismos Lm-gt4s, *rare* Raybrig Hids, Custom Undertray, Pivot Ssl-pro, Narva Fogs, Apexi Power Fc Djetro, Z32, Grounding Kit, Bee-r Muff, Apexi Pow


Recommended Posts

@ sydney/homebush, first in first served, all offers considered, can deliver anything but big things you'll have to pay ;)

BRAND NEW Nismo 18" LM-GT4 package, one of the lightest forged monoblock rims in a size that will fill up your guards

2x Genuine Nismo wheels: 18 x 8.5 +25 offset, ~8kg

2x Genuine Nismo wheels: 18 x 9.5 +30 offset, ~8.5kg

4x Genuine Nismo LM-GT4 centre caps

20x Genuine Nismo lug nuts (these do not say nismo on them)

1x Genuine Nismo lug nut key

4x Genuine Nismo Valve stems (these say Rays on them)

TOTAL PACKAGE (not seperating) $3300

BRAND NEW beefy and sturdy quality z32 cast aluminum AFM adapter

$50 express overnight delivered

BRAND NEW s15 (will fit s14 as well) bolt-on sump protector bash plate, 3mm thick aluminum

$200

USED genuine and damn rare Raybrig HID foglights!!, including all wiring and Raybrig switch, Raybrig relays and Raybrig housings

$590 express overnight delivered

USED quality brand NARVA foglights

$90 express overnight delivered

USED pivot ssl-pro top of the range shift lamp (F1 sequential lightup) with 3 pages of english (and jap) instsructions

$100 express overnight delivered

ssl-p-animation.gif

USED jdm blue 4gauge-thick gounding wire kit

$60 express overnight delivered

BRAND NEW s15 apexi power fc djetro

$1350 express overnight delivered (if it fits in the bag)

includes everything listed on nengun: http://www.nengun.com/apexi/power-fc-hand-controller-d-jetro

so... powerfc unit, hand controller, nipples, map sensor, harness

USED genuine Bee-R axle back muffler with some scrapage, current hangers will fit s15/s14 or cut it off for your own custom fit, sounds tufffffffff

$90

BRAND NEW s15/s14 apexi super suction kit with replica pipe and genuine apexi filter

$280

@ sydney/homebush, first in first served, all offers considered, can deliver anything but big things you'll have to pay :)

LOTS and lots OF PICS HERE:

http://www.nissansilvia.com/forums/index.p...howtopic=347929

Hey mate, have you still got the pivot shiftlight? If so, I'll most likely take it off your hands. Can you Pm me your best price delivered to Melbourne.

Cheers mate.

prices dropped:

BRAND NEW Nismo 18" LM-GT4 package, one of the lightest forged monoblock rims in a size that will fill up your guards and allow you to run the most rubber

2x Genuine Nismo wheels: 18 x 8.5 +25 offset, ~8kg

2x Genuine Nismo wheels: 18 x 9.5 +30 offset, ~8.5kg

4x Genuine Nismo LM-GT4 centre caps

20x Genuine Nismo lug nuts (these do not say nismo on them)

1x Genuine Nismo lug nut key

4x Genuine Nismo Valve stems (these say Rays on them)

TOTAL PACKAGE (not seperating) $3300

price dropped: $3200

BRAND NEW beefy and sturdy quality z32 cast aluminum AFM adapter

$50 express overnight delivered

price dropped: $40

BRAND NEW s15 bolt-on sump protector bash plate, 3mm thick (will fit s14 as well)

$200

price dropped: $180

USED genuine and damn rare Raybrig HID foglights!!, including all wiring and Raybrig switch, Raybrig relays and Raybrig housings

$590 express overnight delivered

price dropped: $560

USED quality brand NARVA foglights

$90 express overnight delivered

price dropped: $70

USED jdm blue 4gauge-thick gounding wire kit

$60 express overnight delivered

price dropped: $50

BRAND NEW s15 apexi power fc djetro

$1350 express overnight delivered (if it fits in the bag)

price dropped: $1300

includes everything listed on nengun, note that the nengun price on the following link is just for the main unit itself, you have to buy the sensors seperately: http://www.nengun.com/apexi/power-fc-hand-controller-d-jetro

so... powerfc unit, hand controller, nipples, map sensor, harness

USED genuine Bee-R axle back muffler with some scrapage, current hangers will fit s15/s14 or cut it off for your own custom fit, sounds tufffffffff

$90

price dropped: $70

BRAND NEW s15/s14 apexi super suction kit with replica pipe and genuine apexi filter

$280

price dropped: $260

@ sydney/homebush, first in first served, all offers considered, can deliver anything but big things you'll have to pay :thumbsup:

LOTS and lots OF PICS HERE:

http://www.nissansilvia.com/forums/index.p...howtopic=347929

Edited by _Wing_

hey man, could you tell me what price you could do for the muffler delivered to canberra (2607)?

cheers

@ sydney/homebush, first in first served, all offers considered, can deliver anything but big things you'll have to pay :)

BRAND NEW Nismo 18" LM-GT4 package, one of the lightest forged monoblock rims in a size that will fill up your guards and allow you to run the most rubber

2x Genuine Nismo wheels: 18 x 8.5 +25 offset, ~8kg

2x Genuine Nismo wheels: 18 x 9.5 +30 offset, ~8.5kg

4x Genuine Nismo LM-GT4 centre caps

20x Genuine Nismo lug nuts (these do not say nismo on them)

1x Genuine Nismo lug nut key

4x Genuine Nismo Valve stems (these say Rays on them)

TOTAL PACKAGE (not seperating) $3300

price dropped: $3200

BRAND NEW s15 bolt-on sump protector bash plate, 3mm thick (will fit s14 as well)

$200

price dropped: $180

price dropped: $170

USED genuine and damn rare Raybrig HID foglights!!, including all wiring and Raybrig switch, Raybrig relays and Raybrig housings

$590 express overnight delivered

price dropped: $560

price dropped: $500

USED quality brand NARVA foglights

$90 express overnight delivered

price dropped: $70

price dropped: $60

USED jdm blue 4gauge-thick gounding wire kit

$60 express overnight delivered

price dropped: $50

price dropped: $40

BRAND NEW s15 apexi power fc djetro

$1350 express overnight delivered (if it fits in the bag)

price dropped: $1300

includes everything listed on nengun, note that the nengun price on the following link is just for the main unit itself, you have to buy the sensors seperately: http://www.nengun.com/apexi/power-fc-hand-controller-d-jetro

so... powerfc unit, hand controller, nipples, map sensor, harness

BRAND NEW s15/s14 apexi super suction kit with replica pipe and genuine apexi filter

$280

price dropped: $260

price dropped: $240

@ sydney/homebush, first in first served, all offers considered, can deliver anything but big things you'll have to pay :)

LOTS and lots OF PICS HERE:

http://www.nissansilvia.com/forums/index.p...howtopic=347929

still got the nismo rims mate ?!?! PLEASE tell me u still got it. PM or sms me at 0412896750 VERY interested.

still got the nismo rims mate ?!?! PLEASE tell me u still got it. PM or sms me at 0412896750 VERY interested.

Me too what colour are they

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...