Jump to content
SAU Community

Recommended Posts

For N/A it has a bit of power quiet impressive i can see this being the 240z of the future.... Does anyone know the max power you can get from a 350z? As in Extractors, High flow cat and a good exhaust and tune anyone here know anyone?

Link to comment
https://www.sau.com.au/forums/topic/246441-370z/page/2/#findComment-4288500
Share on other sites

For N/A it has a bit of power quiet impressive i can see this being the 240z of the future.... Does anyone know the max power you can get from a 350z? As in Extractors, High flow cat and a good exhaust and tune anyone here know anyone?

For a 2003-2005 model with the 206kW engine, on a good day you'll see around 180rwkW (depending on the dyno).

Mine pulled 195rwkW on CRD's dyno here in Sydney with practically the mods you've listed, but on APS' dyno in Melbourne I'd be lucky to see 180rwkW. When my car was making 185rwkW on CRD's dyno, it was pulling around 170rwkW at APS.

I've seen stock V35s pull higher numbers than stock Z33s, but at the same time it's a case of "different dynos, different operators" so it's hard to say.

The engine delivers power like a passenger car. As you can see, my torque curve is flat as a tack. It's great in the midrange, but until you do all those breathing mods it'll feel a bit choked up top. It depends on what you want with the car.

I've driven a 350Z with a 221kW engine and it's far nicer. The engine revs cleanly all the way to the limiter stock, where a 206kW engine will start to strain from around 1000-1500RPM from redline. The loss of 10Nm in the midrange can barely be felt, but how much smoother it feels in the top third of the rev range makes it a much nicer experience.

Edited by scathing
Link to comment
https://www.sau.com.au/forums/topic/246441-370z/page/2/#findComment-4288693
Share on other sites

With recent times (years 2002 onwards), would it be fair to assume that the ADM models will be just as powerful as JDM, factoring in thier higher fuel octanes ect..? I know that with the last crop of imports by Nissan Aust, eg 200sx, they have always been detuned for various reason, redering them less potent than the cars that are in the same price bracket. As most will know, the GTR all will have same power output reguardless of country being sold at, but will this apply to all Nissans globally?

Link to comment
https://www.sau.com.au/forums/topic/246441-370z/page/2/#findComment-4288845
Share on other sites

For a 2003-2005 model with the 206kW engine, on a good day you'll see around 180rwkW (depending on the dyno).

Mine pulled 195rwkW on CRD's dyno here in Sydney with practically the mods you've listed, but on APS' dyno in Melbourne I'd be lucky to see 180rwkW. When my car was making 185rwkW on CRD's dyno, it was pulling around 170rwkW at APS.

I've seen stock V35s pull higher numbers than stock Z33s, but at the same time it's a case of "different dynos, different operators" so it's hard to say.

The engine delivers power like a passenger car. As you can see, my torque curve is flat as a tack. It's great in the midrange, but until you do all those breathing mods it'll feel a bit choked up top. It depends on what you want with the car.

I've driven a 350Z with a 221kW engine and it's far nicer. The engine revs cleanly all the way to the limiter stock, where a 206kW engine will start to strain from around 1000-1500RPM from redline. The loss of 10Nm in the midrange can barely be felt, but how much smoother it feels in the top third of the rev range makes it a much nicer experience.

yea well how was your tune you said the 221 was good to drive but overall was it good to drive with around 180ish kw?

Link to comment
https://www.sau.com.au/forums/topic/246441-370z/page/2/#findComment-4288883
Share on other sites

yea well how was your tune you said the 221

The tune was checked by a few different outfits. CRD did it, APS has checked it, and I've put the car on the rollers at Unigroup and Autotech here in Sydney and they haven't seen any problems with it.

If I wanted a little more power I should put the factory airbox back on the car and fit a K&N drop-in filter. The OEM airbox is a really good design, and aftermarket intakes generally kill power. I just like the noise of it. :thumbsup:

was it good to drive with around 180ish kw?

Yeah, it's going OK. The car makes a proper sports car noise at high RPM but is still really quiet at low RPM. With all the mods I've run a G-Tech measured 13.9 ET on regular street tyres on....erm......a private road in the middle of nowhere :huh: That road wasn't entirely flat so it's not 100% indicative, but then if I did a proper launch on a properly grippy surface with heated tyres it should even out.

Edited by scathing
Link to comment
https://www.sau.com.au/forums/topic/246441-370z/page/2/#findComment-4289324
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
    • List all of your mods. It sounds like an aftermarket ECU hitting rev limiter. Like a valet mode, or a cold rpm limiter? 
    • @Kapr Haha yeah thats the one. I missed that you had a built up engine, I wouldn't want to run it on there either then. It was good in my situation just to replace the original turbo on a stock engine. @MBS206Yep definitely not a replacement for anything name brand
    • You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
×
×
  • Create New...