Jump to content
SAU Community

Stripping C33 Nissan Laurel

shawn_26
 Share

Recommended Posts

shawn_26 Explorer

shawn_26

Posted
Posted

Ive had my Laurel for sale for ages now and it seems there is not much interest in a defected car. So, if i get enough interest im going to strip it over the next few weeks and sell it in parts.

I will post a list of parts, descriptions, and prices as a guide. If you think the price is inadequate then make an offer. Some items I will remain firm on price, some will be negotiable. No reasonable offer will be sneezed at.

I will post pictures of everything i can over the next few days.

Im located in Brisbane, but will freight at buyers expence nationwide depending on the size of the item.

You can contact me via PM and we can talk from there.

1) C33 Laurel Shell - resprayed Cherry black recently. Body is in very good condition. I will sell as a roller, or as a bare shell depending on a price negotiated, and what parts are to be included. I will state a price at $2000 as a bare shell. Pics over the next few days.

2) RB20DET - Engine runs very good. Compression test will be done over next few days. I will post photos with results over each cylinder. Will sell engine with stock RB20 T3 turbo, and manifolds. $1000

3) RB20DET gearbox - Recently rebuilt by DanTrans. Very nice to shift with, tight gears, all gears engage very smoothly, nice short throw - $700

4) Racing Logic Ultra Complex coilovers - Fully adjustable base height, damper, and pillow ball camber plates on the fronts, good condition, very nice to drift on. Cost $2000 a set new, sell for $800 Pretty sure these fit S13, as well as Cefiro.

5) Whiteline swaybars - front and rear - Not sure what these are worth. If someone knows please let me know.

6) Locked R200 Diff - Very tight, never missed a beat. Cops a flogging and has never let me down. $350

7) Racing Logic hydraulic handbrake mechanism + cylinder - $150

8) R33 GTR Brembo brake rotors + callipers front, R33 GTST rotors and callipers rear - Again not too sure what these will fetch. I guess im open to offers on these.

9) Momo steering wheel and boss kit - $150

10) HKS 2535 Ball Bearing turbo - Very nice turbo. Good condition with braided water and oil lines, no shaft play - $1500

11) 3inch turbo back custom stainless exhaust - Very straight run, with cat, and Zetti cannon muffler. Sounds very nice without being overly loud. $600

12) Stainless 3 inch split dump pipe to fit T3 flanged turbo. Very good condition - $300

13) Superspark RB20 coilpacks with adaptor leads. Have driven less than 1000km with these installed. Cost 500 and something to buy new. Sell for $350

14) Cusco catch can. Good condition. Speedflow fittings. $150

15) GTR injectors - came off an R34 GTR Vspec II, so you could expect they would have done low Kms. Sell for $400.

16) Brand new 2 litre stainless surge tank with push on outlets. Never been used or installed - $150

17) R32 GTST front seats - Very good condition, no rips or tears, or ciggarette burns, nice upgrade to early model S13 or 180SX - $250 for the pair.

18) Racepro atmospheric BOV - $100

19) Cooling pro front mount intercooler with piping kit, very good cond, stainless piping with all silicone connectors and hose clamps - $500

20) Front and rear strut braces - As far as i know these will fit S13's aswell. Front is Cusco brand, rear is unknown. $100 each.

21) 16"x8" -4 offset Performance superlite rims. Driven less than 1000kms on these wheels. Perfect condition. Come with Falken tyres, fronts are almost perfect tread, rears are fairly f**ked as i did a practice night on them. $1500

22) Brand new Nissan R32 GTR injector resistor pack. Still in packaging, genuine OEM part. $150

23) Stock Nissan C33 Laurel front and rear bumpers. Front has had part of inside cut to fit FMIC, in good condition, will need a coat of paint. Rear is in good condition, again could do with a coat of paint. VERY HARD TO GET HOLD OF THESE! Took me months to try and track down both of them. $400 for the set.

24) R33, 5 stud hubs front and rear, Front has 75mm extended wheel studs installed. Not too sure what these are worth, would sell them by themselves or with the Brembos as a package.

25) Koyo motorsport aluminium radiator. Very good cond. $350

26) Rear subframe pineapples. Make an offer.

27) Pretty much every arm in this car aftermarket and adjustable. Hit me up with what you would like and i will name a price or Make an offer.

28) 25mm fibreglass front guards, painted cherry black. One has a slight crack in it, easily repairable - $250 for the pair.

29) Turbonetics 38mm external wastegate, good condition - $200

As i said pics will be up over the next few days. I wont be stripping until i see how much interest i can get. I would prefer to sell the whole car for around the $10,000 mark. But if your interested send me a PM and we can go from there. If you want the engine come and have a test drive while its still in the car.

Cheers, Shawn.

Link to comment
https://www.sau.com.au/forums/topic/247381-stripping-c33-nissan-laurel/
Share on other sites
shawn_26 Explorer

shawn_26

Posted
  • Author
Posted

CAR WILL BEGIN TO BE STRIPPED THIS WEEKEND - Detailed pics of all parts will be taken once they are removed. If you want an item, let me know and i will hold it for you as I am having a lot of interest.

excon Enthusiast

excon

Posted
Posted (edited)

whats the best price you would do on number 6 and7?? the diff and hand brake??

please sms me on 0422 845 840 thanx

oh and how much do you think you would want for the Brembo brakes??

Edited by excon
toffy Veteran

toffy

Posted
Posted

how much for just the front hubs (and whatever i need in a 5 stud conversion , apart from the brakes and calipers) mate?

actually , how much for the whole car as a roller minus motor gearbox diff and front seats ? (pm if you like :P cheers

STATUS Grand Master

STATUS

Posted
Posted

how much for complete roller? body, gaurds etc whole car minus running gear. i have been chasing a laurel to put my spare 26 in.

what state? if in vic i will come round asap.

shawn_26 Explorer

shawn_26

Posted
  • Author
Posted
whats the best price you would do on number 6 and7?? the diff and hand brake??

please sms me on 0422 845 840 thanx

oh and how much do you think you would want for the Brembo brakes??

Hey mate. Handbrake is sold. I could do the diff for $300. Brembos are sold also.

shawn_26 Explorer

shawn_26

Posted
  • Author
Posted
how much for just the front hubs (and whatever i need in a 5 stud conversion , apart from the brakes and calipers) mate?

actually , how much for the whole car as a roller minus motor gearbox diff and front seats ? (pm if you like :P cheers

PM sent

  • 2 weeks later...
  • 4 months later...
12slide Enthusiast

12slide

Posted
Posted

p.m me if you still have this please 3inch turbo back custom stainless exhaust - Very straight run, with cat, and Zetti cannon muffler. Sounds very nice without being overly loud. $600

  • 2 months later...
  • 1 month later...
cwinter Newbie

cwinter

Posted
Posted

Hey mate, this might be a long shot, but do you still have any of these?

Rear Sway bar

Momo steering wheel and boss kit

Front and rear strut braces

Front and rear bumpers

have the wheels gone?

And if available headlights?

Cheers Cohen

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      V37 Suspension change

      By Duncan · Posted

      You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
    • Duncan
      V37 Suspension change

      By Duncan · Posted

      OK, so a bunch of trim needs to come off to get to the rear shock top mounts. Once the seat is out of the way, the plastic trim needs to come off. Remove 2 clips at the top then slide the trim towards the centre of the car to clear the lower clip Next you need to be able to lift the parcel shelf, which means you need to remove the mid dark trim around the door, and then the upper light trim above the parcel shelf. The mid trim has a clip in the middle to remove first, then lift the lowest trim off the top of the mid trim (unclips). At the top there is a hidden clip on the inner side to release first by pulling inwards, then the main clip releases by pulling the top towards the front of the car. The door seal comes off with the trim, just put them aside. The the lighter upper trim, this is easy to break to top clips so take it carefully. There is a hidden clip towards the bottom and another in the middle to release first by pulling inwards. Once they are out, there are 3 clips along the rear windscreen side of the panel that are hard to get under. This is what the rear of the panel looks like to assist:
    • GTSBoy
      R34 manual conversion speed signal wire finding, need help

      By GTSBoy · Posted

      Yes. Autos typically work from the speed sensor on the pinion shaft of the diff. I also think that even if you have a proper speed sensor for the bog manual in the manual box, that the signal it outputs is not compatible with the auto dash anyway. You should consult that manual (the book, not the gearbox).
    • GTSBoy
      First time Skyline owner

      By GTSBoy · Posted

      And I just realised that that advice is slightly nonsensical for a GTR, because you need 2 of them. But it is otherwise true.
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      Having had a reasonable look at the car, I'll be able to remove the (one time) rams and retract the hinge (they are held in the down location by a tiny (m3?) sacrificial screw) which will get it physically back in shape. From there if you remove the rams you need a resistor to turn off the airbag light (as Mark said, there are plug in kits and I might go that way because its reversible). And...per all the threads on here, even if you have the resistors to turn off the airbag light, the bonnet light will stay on as it writes to the airbag computer history - that is either replace the airbag controller, reprogam the EPROM (if I can work out how), or remove the globe from the dash. Having seen how sensitive this system is, if I had my time over I'd pre-emptively remove the rams, even on a road car, because this is all a very unnecessary pain in the arse. Reminds me, time to go and have a look at the Fuga too....
×
×
  • Create New...