Jump to content
SAU Community

Need To Borrow 32gtr Airpods For 5min Just To See If Mine


Recommended Posts

hey guys is there any1 that i can borrow there 32gtr podfilters from just for 5min to try them on my car to see if thats the cause of the problem? im located in dandy

u can sms me on 0422 607 113 thanks guys help much appreciated

how can pod filters be a problem for anything?

just take em off if you need to test, will work the same as swapping

i wana see if there 2 dirty and try another set to see if it makes a big difference

i wana see if there 2 dirty and try another set to see if it makes a big difference

Unless they were so blocked up that air wasnt even going through them...

You wont really notice a difference.

Totally depends on what problem you have though, but ive never heard of a dirty pod seriously degrading performance

the problem is the revs drop really low sometimes and then back up feels like its gona stall and sometimes it does stall thought maybe not getting enough air.yer i think im gona give em a clean with compressor a bit.and im taking the car down to status tuning 2morow to get checked out so they should be able too tell me.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...