Jump to content
SAU Community

Recommended Posts

I recently returned from living in Japan and brought with me all the bits and pieces from the cars I drove over there. They are now taking up space here and I wanna be able to be able to park my car back in the shed so I'd like them gone ASAP. All prices are negotiable. Everything is in Mt Gambier, SA but can organise transport to Adelaide and I’ll be going to Melbourne with a truck mid January so if Melbourne buyers get in before then, transport can be arranged. Can arrange freight to other parts of Australia at buyers expense. My number is 0435 281 536.

Here we go;

SR20:

SR20 red top complete running engine (150,xxx km) with loom, Mines tuned ECU, aftermarket stainless steel exhaust manifold, alternator, starter motor, coilpacks, cas, A/C pump, water pump, oil pump, power steering pump, clutch, air flow meter, pod air filter, HKS blow off valve, engine mounts, manual gearbox and mount. $2,600

DSC_0005-3.jpg

DSC_0006-2.jpg

SR20 red top, suit rebuild. Loom included, water pump ok, one of the coilpacks is stuffed, cas is broken, oil pump is stuffed, sump is cracked (will supply brand new oil scavenger), turbo OK. $1,000

DSC_0003-3.jpg

R32 rear stabiliser $20

Good, cheap upgrade for S13 Silvia/180SX

SR20 catalytic converter $20

S13 drive shafts L&R $30

SR20 intake manifold $20

S13 front brake/lower arm/tension rod/tie rod/hub assy L&R $100

S13 power steering reservoir $10

SR20 pot luck camshafts $100

Brand new, I’ve been told they are aftermarket but I have no idea of specs.

DSC_0014-2.jpg

S13 oil pan guard $40

Aluminum bash plate for sic drifters

180SX rear member $400

With everything, diff, brakes, hubs, drive shafts, etc

180SX rear member $50

Just the bones, nothing attached

SR20 propeller shaft $50

BNR32:

I wrecked a GTR and have all the parts. The engine, loom, ECU, clutch, dashboard, bonnet, headlights, tail lights, indicators and front bumper lip have been spoken for, but everything else is available. Below is a bit of a list but if what you want isn’t there then just ask because I’ll probably have it, I just got sick of typing everything up!!

Seat belts $30

Hand brake, lever and lines $30

Front seats $300 each $500 for 2

Rear seat (2 piece) $200

Steering column $50

Side and Rear skirts $100

DSC_0001.jpg

Boot lid + wing $150

Boot is in ok condition but the wing will need a respray. Sticker is free.

DSC_0007-3.jpg

Rear bumper Reo $100

DSC_0007-2.jpg

Rear bumper $200

No dents but plenty of scratches, need a respray.

DSC_0008-2.jpg

Front bumper reo $100

Front bumper $50

Includes free crash damage……..

ABS unit $80

Radiator overflow bottle $20

Power steering reservoir $20

Fuel tank inc. pump $100

DSC_0010.jpg

Rear sub frame member $1000

Includes everything (brakes, diff, drive shafts, hubs, etc.) except HICAS pump.

Clutch master $50

Brake master $50

RB25:

RB25DET engine with cut loom, ECU, clutch, possibly blown turbo, starter motor, manifolds. $1,600

ST185 Celica GT-4:

Apexi PowerFC + hand control unit for 3S-GT $900

Hand controller has some dead pixels, see photo

DSC_0014.jpg

DSC_0017.jpg

3S-GT ECU $200

DSC_0020.jpg

Instrument cluster $100

Front fenders L&R $100

One small dent, surface rust on lip, plenty of scratches, need a respray. Stickers are free!!

DSC_0005-2.jpg

Rear bumper $200

Bonnet $200

DSC_0009-2.jpg

Rear hatch $200

Plastic rear quarter wing extension pieces are broken but are all there, should be repairable.

Doors $200

Front bumper and lip (big hole chopped out for FMIC) $100

Complete pop up headlight units $200

AE86:

Ducktail rear wing $120

DSC_0003-2.jpg

Negative Camber RCA $40

Two sets of aluminum 30mm, one set of steel 22mm. None have bolts.

DSC_0003.jpg

DSC_0007.jpg

DSC_0009.jpg

Toyota LSD 2-way centre to suit zenki shafts $400

DSC_0011.jpg

JDM rear number plate housing $40

4AGZE (AE92 front wheel drive) complete running engine with loom, ECU, etc. Still on front member complete with struts, brakes, 5 speed manual gearbox. $2,200

4AGE (rear wheel drive (bigport)) complete running engine with loom, ECU, exhaust manifold. Also included is a complete engine overhaul kit (all new gaskets and rubbers), oil pump, water pump, timing belt and tensioner all new still in their boxes. $2,500

DSC_0021.jpg

DSC_0022.jpg

Various:

GReddy Rebic II $150

Auxiliary injector controller, complete unit, only missing injectors.

DSC_0005.jpg

GReddy Rebic III $200

Auxiliary injector controller, complete unit, only missing injectors.

DSC_0008.jpg

Toyota 90 series Mark II Vertex side and rear skirts $250

DSC_0002.jpg

RB20 transmission $500

i'll take this pending pics

JDM rear number plate housing $40

SR20 catalytic converter $20

S13 oil pan guard $40

Power steering reservoir $20

i'll also split posting to syd with anyone that is willing and wants stuff posted to syd

thanks!

Hey champ I will take the gtr side skirts and rear skirts.

I am in melbourne and can wait if you can drive them up mid january :(

cheers!

do you have a 32 gtr cooler?

Yep I do have it but unfortunately someone already has dibs on it. Sorry mate

Any chance you have the front passenger side half shaft off of the BNR32?

Yep, and I've sent you a PM.

  • 2 weeks later...

Hey, I'm after the tie rod ends for front and the passangers side lower control arm (the part that bolts to the bottom of the suspension) for r32 GTR.

Also do you have the stone guards front and back?

PM back if you have :blink:

Edited by Helious

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...