Jump to content
SAU Community

Are There Any Differences Between A R33 Gts-t And A R33 Gts25-t?

Spunky Munky
 Share

Recommended Posts

Spunky Munky Grand Master

Spunky Munky

Posted
Posted

Hi all,

I have heard a few comments and just want to clear this up. I noticed some Skylines do not come badged at the rear with anything to suggest they're a R33 GTS-T or a GTS25-T. However, I have always assumed that the "25" was just to represent the RB25DET engine this models after 1996 to late 1998 had the new "GT25-T" badge and there aren't any differences between the two, is this correct?

However, on the other hand, a few of my mates suggest that the GTS25-T models came with some extra goodies...can someone please confirm this...many thanks.

SM.

Mayuri Krab Grand Master

Mayuri Krab

Posted
Posted

I thought all R33 GTS-Ts had the GTS25t sticker, while the GTS had the GTS25 sticker.

I thought it was just some people removed them coz they like the no sticker/badge look?

My 1993 series 1 R33 GTS-T has a GTS25t sticker, but the "t" peeled off...

Yo-Yo Grand Master

Yo-Yo

Posted
Posted
I thought all R33 GTS-Ts had the GTS25t sticker, while the GTS had the GTS25 sticker.

I thought it was just some people removed them coz they like the no sticker/badge look?

My 1993 series 1 R33 GTS-T has a GTS25t sticker, but the "t" peeled off...

Yep one and the same, when the guys on here refer to an r33 gts-t it's easier to type gts-t rather than gts25-t

there's no actual 'special' gts25-t model, maybe the 40th anniversary models but pretty sure they still came off the showroom floor with the gts25t sticker

AWD versions have gts-4 stickers from factory, doesn't mean the car is a 4 cylinder or 4 litre

Then again you should all get r34's so you only have to type GT-t hahaha

DrewII Community Regular

DrewII

Posted
Posted

correct my 40th anni has a gts25t sticker on the rear. GTS-T is just a shorterned way of saying ur GTS is turbo charged. a lot of people don't even bother with the T on the end. non turbo R33s arent so popular in the heavy tuning motorsports world and most tuners name the GTS25T as just a GTS. as opposed to being a GTR.

Spunky Munky Grand Master

Spunky Munky

Posted
  • Author
Posted
correct my 40th anni has a gts25t sticker on the rear. GTS-T is just a shorterned way of saying ur GTS is turbo charged. a lot of people don't even bother with the T on the end. non turbo R33s arent so popular in the heavy tuning motorsports world and most tuners name the GTS25T as just a GTS. as opposed to being a GTR.

Hey all, thanks for your replies... this answers it nicely!

So there aren't any differences after all - what do you know.

So does the 40th anniversary edition one have anything that's different?

Cheers.

DrewII Community Regular

DrewII

Posted
Posted

to answer your question about the 40th anniversary please run a search plenty has been listed.

all the standard 40th anniversary features have been modified on my car though nothing on my car says its a 40th anniversary anymore :P

Kinks Grand Master

Kinks

Posted
Posted
So does the 40th anniversary edition one have anything that's different?

It has oval "40th Anniversary" badges on the C pillars, similar fabric decals sewn into the front seats and a smug sense of self-satisfaction when driving that you own a "special" model :P

.:: GimpS-R34 ::. Grand Master

.:: GimpS-R34 ::.

Posted
Posted

ahhh some cars come badged from Nissan with a GTS-T sticker on the back.. some come with a GST25T.. So saying that tuners don't look at it isnt the question.. i also wondered about this but never looked into it..

dezz Grand Master

dezz

Posted
Posted
It has oval "40th Anniversary" badges on the C pillars, similar fabric decals sewn into the front seats and a smug sense of self-satisfaction when driving that you own a "special" model :/

More factory options

R34 crank angle sensor

The cams also differ slightly and need to be 98 model specific when replacing/upgrading

  • 5 years later...
Coatsy Rookie

Coatsy

Posted
Posted

More factory options

R34 crank angle sensor

The cams also differ slightly and need to be 98 model specific when replacing/upgrading

well done i have a pristine purple 40th love it done lots and lots of research crank sensor is different its an r34 sensor

the motor in the 40th is called the cross over its a blent of 33 and 34 and as you are aware the option list for the 40th

is nearly twice as long as the standard gts25t great drivers car

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Jacks that fit under GTR lips that can reach the subframe?

      By Kinkstaah · Posted

      I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • TurboTapin
      Jacks that fit under GTR lips that can reach the subframe?

      By TurboTapin · Posted

      So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • suko
      J50 clock date suddenly reset to January 1

      By suko · Posted

      Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
    • Dose Pipe Sutututu
      Chris' Toyota Mark ii JZX110

      By Dose Pipe Sutututu · Posted

      I suppose it was relatively stock too, the JZ motor handle most mods thrown at them without even breaking a sweat 
×
×
  • Create New...