Jump to content
SAU Community

Recommended Posts

Hi, I have just bought a new toy and am pretty green with turbo motor's so want some advise on what parts to use,

It is a RB25DET & manual, It is running pretty much stock but with a GT35/40 and big FMIC, I am going to go with Splitfire coilpacks as I found them really good on my old RB20DET,

Is a Bosch 044 fuel pump enough to run this, I have been told to use GTR injectors but have no idea what size they are (440/550cc??) or what size I should go with,

I want to high mount the turbo, get a front facing plenum, Maybe bigger throttle body if needed, Bigger injectors? and pump, some kind of computer to run it and splitfire coilpacks and wind the boost up a little (is only on 8PSI)

Can somebody tell me what size injectors I will need for this setup and any other info or advise would be great, just want a good reliable setup, Also, what kind of boost is safe on a standard internal RB25DET, Can I give it 15+ PSI?

Firstly do a search, most of your questions will be answered if you spend some time researching yourself.

But a quick run down would be:

Aftermarket ECU

740cc Nismo injectors

Pumps

full exhaust

EBC

At 15psi you should make just under 300rwkw if not a bit more. First thing to get is the ECU, running a GT3540 on a stock ECU is asking for trouble.

I have seen plenty of "mines tuned ECU's" for sale (ebay), are these any good for what I want, Or better to save some extra coin and go some thing like a Power FC?

Oh, And also has full 3" exhaust already too

Edited by 350stato

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Can u check this way it works for power supply?
    • These coils draw 10amps that what i read online
    • I appreciate the detailed explanation, think I understand now. I spent the better part of last night reading what I could about shuffle and potential solutions. I had replaced the OEM twin turbo pipe with an alternate Y pipe that is separated further away from the turbo. The current one is from HKS and I had a previous pipe that was separated even further away, both have shuffle. I had heard that a divider can be welded in to the OEM pipe to remove turbulence, and figure that aftermarket pipes that are more separated would achieve the same thing. From what I read, most people with -10 turbos get shuffle due to their size, though it's a bit less common with -5s on a standard RB26. I think Nismoid mentioned somewhere it's because OEM recirculation piping is common in Australia with -5 cars. It seems that the recommendation tends to vary between a few options, which I've ordered in what I think is most feasible for me:  1. Retune the MAP or boost controller to try to eliminate shuffle 2. Install OEM recirculation piping 3. Something called a 'balance pipe' welded onto the exhaust manifolds. I don't know if kits for this are available, seems like pure fabrication work 4. simply go single turbo My current layout is as follows: Garrett 2860 -5s HKS Racing Suction intake MAF delete pipes HKS racing chamber intake piping hard intercooler piping,  ARC intercooler HKS SSQV BOV and pipe Haltech 2500 elite ECU and boost solenoid/controller HPI dump pipes OEM exhaust manifolds HKS VCAM step 1 and supporting head modifications Built 2.6 bottom end All OEM recirculation piping was removed, relevant areas sealed off I'll keep an eye out for any alternative solutions but can get started with this.  Only other question is, does shuffle harm the turbo (or anything else)? It seems like some people say your turbo shafts will explode because of the opposing forces after a while and others say they just live with it and adjust their pedal foot accordingly. 
    • That worked out PERFECTLY! Thank you big time to JJ. He was able to swap me his stock diff. He drove all the way to me as well. Killer! Removal & install was pretty straightforward. The diff itself is HEAVY. So that’s a 2 man job.  Man does the car drive nice now! Couldn’t have worked out any better 👌
×
×
  • Create New...