Jump to content
SAU Community

Defect Help

frozenwaffles

By frozenwaffles,
in New South Wales

 Share

Recommended Posts

sneki81 Community Regular

sneki81

Posted
Posted

ok, let me know if i havnt done this right and ill do it again. i got a piece of rope and measured around the outside of the rim(not tyre included). it measured 1400mm. the tyres i have on are front- 205/55r16, back- 225/50r16. tyres were only just put on when i bought it so i dont know if they are the standard size. the rims are though.

frozenwaffles Mentor

frozenwaffles

Posted
  • Author
Posted

sorry dude, not after the circumference, just the diametre, so in a straight line from the front of the tyre to the rear of the tyre...(cant measure top to bottom with the weight of the car on it...)

JunglBoi Enthusiast

JunglBoi

Posted
Posted (edited)

it should be... something like

u can make the rim size 1 size larger...as long as the profile is 1 size smaller kinda thing

and i think u can make it like an inch bigger than normal

so say a 16inch rim with 3 inch profile on each side of the rim

u can get 18 inch rims as long as its 2inch profile on each side of the rim

if that makes sense

and yeh i got 81 fines for each defect

but didnt get done for my turbo timer

but i think they figured it awsnt such a bad deal after already giving me 10 defects

LOLS

it was quite funny

because there was only enough room to write out 9 defects so he wrote it in the lil corner at the top

LOLS

Edited by JunglBoi

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Just_a_datsun
      RB26 block, rb26 head

      By Just_a_datsun · Posted

      Block bump. $400. As above cyl 6 needs bore or sleeve.
    • Kinkstaah
      Blue slip

      By Kinkstaah · Posted

      I would think making the argument that the travel is limited by a spring flexing against a spring perch as "the same method". Later on in the document they do state that the spring can't bind on full bump travel and cannot come loose in full rebound travel as well. (which is all very sensible). The laws are actually pretty sensible and reasonable. It's just that the people who enforce and check them don't actually read them or know them accurately. "Oh, coilovers? Instant fail mate. Don't even need to look at it." - Guy who will be instantly reported by me. There is probably merit to people who do get defected for height also get defected for the suspension in that state that allows it. I did never consider the people who are complaining about coilovers being picked on are also running around at 50mm off the floor.
    • Kinkstaah
      Ethanol Content Sensor - Always at 11%?

      By Kinkstaah · Posted

      I think given SAU's knowledge of E85 we can strongly conclude that 10% ethanol in almost any situation is entirely fine. Almost all of the myths against E85 were overblown, let alone E10.
    • The Bogan
      Blue slip

      By The Bogan · Posted

      From your link See bold text, is this referring to damper settings, if so that may a issue for "some" inspectors, I cannot see aftermarket coilovers having the evidence that "must be available that its functional performance is equivalent to the original" Maybe just remove the adjustment knows and hope for the best???? Meh 5.2 Suspension travel In all instances, modifications to a vehicle’s suspension must ensure the integrity of the system and not compromise the ride quality. At least two thirds of the original suspension travel should be maintained in both directions (rebound (i.e. extension) and bump (i.e. compression)), and rebound must be limited by the same method used by the vehicle manufacturer or if this is not practicable due to the nature of the modification, an equivalent method. If an alternative method is used, evidence must be available that its functional performance is equivalent to the original.
    • Kinkstaah
      Blue slip

      By Kinkstaah · Posted

      They actually don't - They adhere to VSB14 rules just like Victoria. The rules are against CABIN adjustable height, and it quite clearly states that the height has to be within parameters. I asked the VASS engineer to confirm this when I got my car engineered and they refused to engineer the coilovers because they didn't meet the requirements for requiring engineering. (mine are height adjustable.) People "Not wanting to bother" with "Actually reading/knowing/adhering to the rules" should result in fines and immediately losing the ability to issue blue slips and/or RWC's in Vic.
×
×
  • Create New...