Jump to content
SAU Community

Recommended Posts

Hey all im just selling a few parts off my old RB converted S13 the parts are a follows

1x Apexi Power FC *RB25DET* in very good condition heres a link to my EBAY http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...em=250345594025

also for sale is 6x RB25 S1 coilpacks and igniter + loom $100

RB25DET air flow meter $80

1x 600x300x100 one sided intercooler with pipework (so you don't need to cut a hole in the battery tray) as it uses stock hole position.

im located at tweed heads and would prefer local pick up or will ship the smaller items

will update as more parts come up cheers kegz

Edited by kegz
Link to comment
https://www.sau.com.au/forums/topic/249662-apexi-power-fc-rb25det/
Share on other sites

sweet pm me for my bank account details and when the money clears i'll send the unit too you.. my email is [email protected] (yeah i know it says toyota lol)

and yes i do know an amanda kirchner.. if it's the same person then she would be my cousin

i'll let you have it for $250 pick up, more if you want deliverd (yes this is for an S13/180sx)

thats intercooler, pipe work with 2x 90degree silicon bends and T-bolt clamps

(please note that the pipe work is only too the hole where the standard cooler pipes run too not all the way to the throttle body and turbo.

that is still cheap considering what your getting..

PM me if your interested

oh and Power FC is SOLD!!

i still have coil packs and ignighter + loom

and air flow meter

Edited by kegz


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...