Jump to content
SAU Community

Recommended Posts

Hey all im just selling a few parts off my old RB converted S13 the parts are a follows

1x Apexi Power FC *RB25DET* in very good condition heres a link to my EBAY http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...em=250345594025

also for sale is 6x RB25 S1 coilpacks and igniter + loom $100

RB25DET air flow meter $80

1x 600x300x100 one sided intercooler with pipework (so you don't need to cut a hole in the battery tray) as it uses stock hole position.

im located at tweed heads and would prefer local pick up or will ship the smaller items

will update as more parts come up cheers kegz

Edited by kegz
Link to comment
https://www.sau.com.au/forums/topic/249662-apexi-power-fc-rb25det/
Share on other sites

sweet pm me for my bank account details and when the money clears i'll send the unit too you.. my email is [email protected] (yeah i know it says toyota lol)

and yes i do know an amanda kirchner.. if it's the same person then she would be my cousin

i'll let you have it for $250 pick up, more if you want deliverd (yes this is for an S13/180sx)

thats intercooler, pipe work with 2x 90degree silicon bends and T-bolt clamps

(please note that the pipe work is only too the hole where the standard cooler pipes run too not all the way to the throttle body and turbo.

that is still cheap considering what your getting..

PM me if your interested

oh and Power FC is SOLD!!

i still have coil packs and ignighter + loom

and air flow meter

Edited by kegz


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...