Jump to content
SAU Community

Recommended Posts

hi i am new to these forums .i am prepared to offer my services to the members .

i have access to a cnc lathe with live tooling and also a machine centre "mill'.

my proposal is if anyone has any ideas /parts they would like to have cnc machined and there is a interest in it on the forum to make it worth making ,i am prepared to make parts .obviously the person that has the idea will recieve their part for free or for cost of material if it goes to manufacture.

prefer to make cosmetic parts or bolt on like brake res caps /covers etc you may have seen a part for another make/model car or don't know where to buy the part from .no performance parts like turbo bov etc

start sending your ideas

dave

Edited by texasholdem
Link to comment
https://www.sau.com.au/forums/topic/250002-look-cnc-machining-custom-parts/
Share on other sites

To be honest, i have done this brake conversion on a car. Its really not a good setup at all, as to make the pad gat close to full contact on the rotor, we had to machine a lot of alloy out of the calliper to suit the different diameter rotor, which is certainly highly illegal , as it weakens the calliper, and even after taking enough metal off the calliper that the bolts holding the two halves of the calliper were exposed, even then the pad hung off the edge of the disc, which obviously isnt good for pad wear and brake performance. Although it seems like a good upgrade, the end result is definately a :laugh: and could never be properly engineered

i have done a few brake conversion kits and wondered how it would go with the extra dia on the disc .

if someone had done it and could supply a sample to copy it would be easier .i dont really want to pull my car apart to jig up a caliper if it isnt a really good conversion .

my wife uses our r34 as a daily so a brake kit is something that would take time .

more interested in making bolt on bits or cosmetic bits .billet strut brace mounts etc would be easier to make . i will have a look over the car the next few days for suggestions and see what ideas i can come up with

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...