Jump to content
SAU Community

Recommended Posts

hey all, running an rb20DE+T has been this way for about 40xxx kms,

tonight (it's hot) the car seemed to be very... low .. on idle, didn't think much of it, next stop light, car began shuddering and shaking

then up the road began sounding like a complete TRUCK .. not too good.. so i stopped

the engine bay smelled really ... undesirable.. coolant levels were fine, oil levels are fine, coolant TEMP is fine.. engine TEMP is fine... yet.. the head is producing HUGE amounts of heat

let the car cool down completely and had to limp it home

because there was no tow truck that wanted to help me

either way

here's the clues

temp guage at normal

coolant at normal

radiator not hot

oil levels fine

cooler pipes fine

comes onto boost fine

spools up fine

but

makes horrible noises once properly warmed up

producing awful amounts of heat on the head

w

t

f

Link to comment
https://www.sau.com.au/forums/topic/250990-help-regarding-rb20/
Share on other sites

Radiator not hot at all or normal temp? If the head is really hot and the radiator isnt then maybe coolant isnt flowing properly. Maybe your water pump is gone. The coolant could still appear normal temp if the coolant surounding the temp sensor is not overheating. Just an idea

that would make sense really... radiator was not hot like AT ALL like no heat what so ever even on the cap itself

but in the event of the water pump being stuffed... i had my 100k service done not long ago... like... a few months ago.. and had the water pump replaced then... it's still a brand new pump!!

hot dog... i hate cars..

haha

sounds very thermostaty...

also has the coolant been bled properly?? maybe has a huge air bubble cruising around the head...

also, where are you checking the coolant level?? in the radiator with the cap off or in the overflow bottle?? and with the engine running or not??

if its making horrible noises when warmed up im thinkin head or head gasket is dying check plugs for evidence of wetness.. pressure test cooling system and look into cylinders to see if any are filling with coolant..

cheers

Linton

there's no milky oil

dont you DARE say something is wrong with the head, that would break my heart.. haha!

coolant levels have been checked in both places..

i doubt it would have been bled incorrectly because i had it bled @ kensai garage by roy who is (in my opinion) perth's best most meticulous mechanic

so

will check thermo soon as i get the chance

althoguh

honestly guys... im pretty car savvy, but i also dont mind getting a mechanic

is this a "just do it on a thursday night" job?

or is this a "spend 3 weeks on it and cut up my hands and regret not taking it to a pro in the first place" job

cos seriously i dont have the time needed for that sort of mess =)

UGHHHHHH!!!!!!

i've gotten the hose off from the housing but there's three bolts which hold the housing to the block

i've gotten 2 bolts off the housing but there's a third one which is not only hidden but also blocked by about 4 different things!!!!

can anyone please provide advice with how to get this FUCKER off???

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Is it alright to top up with just another green coolant?
    • thanks GTSboy. My confusion at the moment is i am trying to locate the ignition, ECU battery power and the ECU negative The closest thing i can find is the for the S15 on Page 8 of the Wiring Specialties web page https://drive.google.com/file/d/0B9F33_M_GgENQnZ6STMxVmVNd1E/view?resourcekey=0-eZ4nNRwRoqa1qvKlWWHm8A I cannot find the same diagram for the R33 RB25DET Series 2 dash plug pin out.... Do you know what the Pins? or know where i can find the same pinout diagram for the RB dash plug? Thanks for the advice on the box... i like a 6 speed so might be on the lookout or the box now.. a topic of discussion for another post...
    • Will have a look at that. I cant see any leaks 
    • Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
×
×
  • Create New...