Jump to content
SAU Community

Recommended Posts

Hey everyone,

Just got some parts to clear out. PM me if interested.

R34 RB25det intake manifold (top section) $80

-Good for turning into front facing plenum

manifold1rx3.th.jpg

R34 RB25det intake manifold (lower section) $80

-Good flanges for welding aftermarket plenum on

manifold2si1.th.jpg

R34 RB25det throttle body / AAC valve $80

throttlebodymn0.th.jpg

R34 Rear high stop light $40

-Standard rear high stop light, to fit 1998-2002 R34

-Perfect working order

factoryhighstoplight2eg2.th.jpg

R34 Skyline / Stagea side blinkers $40

-Standard blinker / indicator lights

-Fits 1998-2002 R34 and Stagea

-Perfect working order

-Blubs included

factorysideblinkers1pj6.th.jpg

R33 GTR Blow off valves $180

-Factory BOV's off R33 GTR

-Can split for $100 each

blowoffvalvesii7.th.jpg

NOTE: All prices are (AU) dollars. Shipping will be additional $15 (AU). Open to reasonable offers.

Am located in Auckland, New Zealand

My trader feedback if necessary:

http://www.skylinesaustralia.com/forums/in...=37637&la=0

Cheers

Edited by Chang
Link to comment
https://www.sau.com.au/forums/topic/251025-garage-clear-out/
Share on other sites

PM's sent and replied.

Also found this hiding in the corner.

R34 Xenon Headlight RHS $200

-Both brackets broken

-Small hole on housing, does not affect light operation

-Park light section needs to be pushed back in as it jiggles (circled red)

-Includes power unit

-All bulbs included

96555044aa0.th.jpg

xenonheadlightrhs2eq7.th.jpg

xenonheadlightrhs3ar5.th.jpg

Edited by Chang

** Throttle body / AAC valve sold **

All other parts available.

Please don't PM or tell me to PM you (as per people above) if you have no intent of buying. Your just waisting mine and your time.

Also selling these now as thinking about putting car up for sale

R34 Pedal box $100

-Clutch + brake pedal

-Both refurbished and painted

-Nismo pedal attachments included

afterir9.th.jpg

Cheers

Edited by Chang

R33 / R34 Cusco front strut bar / brace $120

-Will fit all R33 and R34 models (series I / II and GTR)

-Mint, apart from small paint nic at end plates

cuscostrutbrace2ng6.th.jpg

cuscostrutbrace3df6.th.jpg

Maybe more parts to come, so keep a look out in this thread

** R34 XENON headlight SOLD **

Still Available:

- R33 / R34 Cusco front strut bar / brace $120

- R34 Pedal box $100

- R34 RB25det intake manifold (top section) $80

- R34 RB25det intake manifold (lower section) $80

- R34 Rear high stop light $40

- R34 Skyline / Stagea side blinkers $40

- R33 GTR Blow off valves $180

Edited by Chang

** Price drop **

Still Available:

- R33 / R34 Cusco front strut bar / brace $120 $100

- R34 RB25det intake manifold (top section) $80

- R34 RB25det intake manifold (lower section) $80

- R34 Rear high stop light $40

- R34 Skyline / Stagea side blinkers $40

- R33 GTR Blow off valves $150 $120

** Cusco Strut Bar SOLD **

- R34 RB25det intake manifold (top section) $80

- R34 RB25det intake manifold (lower section) $80

- R34 Rear high stop light $40

- R34 Skyline / Stagea side blinkers $40

- R33 GTR Blow off valves $120

Edited by Chang

- R34 RB25det intake manifold (top section)

- R34 RB25det intake manifold (lower section)

- R34 Rear high stop light

- R34 Skyline / Stagea side blinkers

- R33 GTR Blow off valves

** NO prices now! Make a decent offer and it's yours **

Edited by Chang

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
×
×
  • Create New...