Jump to content
SAU Community

[ Full Hks Turbo Kit - 2835, Manifold, Gate, Front & Dump Pipe, All Lines ]

konect
 Share

Recommended Posts

konect Mentor

konect

Posted
Posted

Hello gents,

Need all this gear gone ASAP so I can organise my new turbo and get my car on the road finally! Details are:

Genuine HKS highmount manifold (RB20, may fit RB25?) - Purchased new a couple of years ago and in perfect condition.

Genuine HKS 35mm wastegate - Comes with screamer and the usual goodies

HKS 2835 (Has been rebuilt with new HKS core and high flowed) - This turbo has done less than 1000ks since undergoing a rebuild with a brand new HKS core, and was also highflowed by the rebuilder (even though it wasn't asked for >.<). The rebuild was due to cracking a piston in the old motor which destroyed the exhaust wheel. The turbo itself was operating at 100% prior to this.

Rebuild was done by Eastern Turbo Chargers in Bayswater and unsure on the highflow specs due to previous owner not keeping the details. It made 193rwkw @ 13psi on my Ceffy with exhaust leaks but I didn't push it further due to lack of supporting mods.

Also included is:

Turbo lines

Intake pipe (without pod filter/AFM)

Custom dump and front pipe (has location to plumb gate back in if required) - Needs a new gasket on the plumb back to the front pipe

Asking $2500 for all of the above. It's a perfect bolt on option with no stuffing around organising parts.

I can be contacted on 0412 033 449 for interested buyers.

PICS:

enginebay1.JPG

enginebay3.JPG

turbo1.JPG

turbo4.JPG

Cheers,

Ryan.

konect Mentor

konect

Posted
  • Author
Posted
That's a MAD looking engine bay man! :cool:

Free Bump

Thanks man, will look better with a new low mount haha.

Someone buy this kit! I am open to offers and neeeeeed to sell it :yes:

  • 2 weeks later...
ONETEN Enthusiast

ONETEN

Posted
Posted (edited)

Dude, im interested. Can you please provide some pics of wheels both front and back, and of the manifold & gate??

What sort of response were you seeing from this setup? Ie on a level road what RPM did it start to build boost and what RPM was full boost at?

Thanks :P

EDIT: Also some turbo info would be great, A/R's, wheel trims etc.... cheers

Edited by copey86

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • dyl33
      VOLK RACING GTC CENTRE CAPS

      By dyl33 · Posted

      Centre caps $250
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Duncan
      Boost cut after swap(RB25DET NEO) R34

      By Duncan · Posted

      Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...