Jump to content
SAU Community

Recommended Posts

i don't think 260hp atw will achieve low 13's? aim for 300hp maybe?

get Vi-Pec ECU, 650cc injectors (sorry was thinking of RB25) maybe go a bit smaller?, 040/044, FMIC and a turbo upgrade... all the basic bolts on and you should achieve 300hp i would say

estimate though of course, and with a really good tune... with those mods you'll push a fair bit more than 12psi safely to help you get more than the 260 you're expecting

thanks for the help just hav too work out a budget new couple of weeks im gettin frnt mount 044 fuel pump fuel reg

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4352041
Share on other sites

  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

i don't think 260hp atw will achieve low 13's? aim for 300hp maybe?

get Vi-Pec ECU, 650cc injectors (sorry was thinking of RB25) maybe go a bit smaller?, 040/044, FMIC and a turbo upgrade... all the basic bolts on and you should achieve 300hp i would say

estimate though of course, and with a really good tune... with those mods you'll push a fair bit more than 12psi safely to help you get more than the 260 you're expecting

650cc injectors?

you will piss 300rwhp in on stock injectors.

i'd be going with what michael said first, safc, 25 turbo.. etc.. then see how you go. can always sell the safc/turbo for pretty much what it cost you and upgrade if/when you want more power.

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4352048
Share on other sites

people have done mid to low 13's with 250rwhp

+1 r32 is lighter than the r33/34 so you dont need as much power

i ran 13.0 with 300ish rwhp (top end speed was good for a mid 12's 112mph) so my advice would start at 250rwhp and see where that takes you, remember practice makes perfect and dont expect to be super fast at the drags your 1st time :laugh:

edit: beaten by mitchy_

Edited by [Michael]
Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4352049
Share on other sites

+1 r32 is lighter than the r33/34 so you dont need as much power

i ran 13.0 with 300ish rwhp (top end speed was good for a mid 12's 112mph) so my advice would start at 250rwhp and see where that takes you, remember practice makes perfect and dont expect to be super fast at the drags your 1st time :P

edit: beaten by mitchy_

thank for ur help micheal i got a qoute today for a x force turbo bak zorst for 1450 is that a good and wat sore of power would i get

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4352744
Share on other sites

thank for ur help micheal i got a qoute today for a x force turbo bak zorst for 1450 is that a good and wat sore of power would i get

hrmm Not saying thats bad but its alot i paid

under 1k for a turbo back 3" custom Zaust from my mate i could ask if you isnt busy to make you one all you need to get it the high Flow cat (or decat) and Muffler (cannon)

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4352754
Share on other sites

hrmm Not saying thats bad but its alot i paid

under 1k for a turbo back 3" custom Zaust from my mate i could ask if you isnt busy to make you one all you need to get it the high Flow cat (or decat) and Muffler (cannon)

thats would be good bro maybe ill buy the dump pipe and hight flow cat how much am i lookin at payin

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4352789
Share on other sites

go to justjap.com have a look at what styles / prices

if not call them they are nice people you would be looking at like 100 - 250 for the Dump pipe DEPENDS which one u like / wants.

High flow cat is around 175 + / or decat is free :P ha

then not to sure about sending it over its not to much!

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4352859
Share on other sites

Anything can happen on the track its a different surface comes down to practise and time / driver! so you can have 250 hp and still run 14 /15s

best guess is to try for yuorself, its hard to judge

yeah i kne but very soon im gunna take it down hehe i got stock susp jus hav too give my car a serv and stuff

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4352959
Share on other sites

Should be all good i still need to head down want to see what mine is running as it is stock still

got

FMIC

Custom straight turbo back Zaust

pod

JIC Coilovers

and other bits

hopefully get in the 13's

then need get a tune and see how it goes!

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4352973
Share on other sites

Anything can happen on the track its a different surface comes down to practise and time / driver! so you can have 250 hp and still run 14 /15s

best guess is to try for yuorself, its hard to judge

this is very true

went down last week to the drags and there was a guy in a 2JZ Supra TT running 17s????? :P

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4352982
Share on other sites

17's!!! unless he had no legs or it was a N/A with bagdes hahaha

wow

it had a fmic on it and his number plates we 2JZ but i dont know, there was no bov and those things weight a fair bit but it was only on par with v6 commonwhores. We thought he was just a tool who had put badges on and bolted a FMIC in to look "cool"

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4353018
Share on other sites

it had a fmic on it and his number plates we 2JZ but i dont know, there was no bov and those things weight a fair bit but it was only on par with v6 commonwhores. We thought he was just a tool who had put badges on and bolted a FMIC in to look "cool"

how will i find him bro

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4353025
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...