Jump to content
SAU Community

Recommended Posts

Hey guys i have a r34 25gt and about 1 week ago while driving my engine light came on, so i pulled over and turned off the engine and turned it back on again, it was gone for about 15mins and it came on again, i took the car to this crappy mechanic and they didn't have the computer to analyze the error code. But they told me to reset my computer by taking the battery and if the engine light dosnt come on again everything should be fine, so i did what he said and surely the engine didn't come back on.

But today while driving to work the engine light came back on, but after work i took it for a drive and it didn't come back one....anyone have any ideas what problem this could be?

I called my local nissan dealer and they said their computer is not compatible with imported skylines...is there any mechanic around Sydney that has a computer that can analyze the error codes?

also a quick question i have a semi auto r34 and theres a button with A/T SNOW what is that for?.

cheers

Edited by MaShi
Link to comment
https://www.sau.com.au/forums/topic/251878-engine-light-randomly-turning-on/
Share on other sites

sorting this out is just so simple if you put a teenie bit of effort in - you absolutely don't need Nissan dealer or anyone

you can get the error code in about 2 mins all you need is a piece of wire - I am not going to explain everything as the topic has been covered many times on here (SAU) - what I will recommend is YOU download the R34 Engine Manual - FREE ON NUMEROUS WEBSITES - just google it - then spend all of about 5 mins reading it - it tells you everything you need to know and do

you will probably then work out you have a Code 21 and take all of our words for it that means new coils (Splitfires best) - we all have been thru what you are now experiencing - FIRST just the checklite restart and all appears OK but soon enough if you do nothing one day the car will begin very serious misfiring maybe even to point of not driveable - not good if you are 100s k s from home

believe me you don't need Nisssan dealer or mechanic to fix the problem - so save big money avoiding labour service charges and get to it

Cheers

i wen to get it tested today, came out with error code 21 : main ignition system (something like that), the mechanic reset the computer for me and said if it comes on again come check it again and if its the same error code then its your coilpacks, and on my way home the engine light came on again.

so how long do you guys think i have until it start to mis fire?

mine came on when i was driving home from work, it came up with the engine light, did an engine diagnostic cuz it sounded n drove like a rexi (no offence lol :D )...

replaced all coils with splitfires n been beaut eva since.. no point replacing the bad 1 cuz if 1ns screwing up its more than likely they will all start going...

strange it aint miss firing already tho :laugh:

<br />yeah the car is not shaking or miss firing.... its pretty weird<br />i wanna make sure before spending 700$ to change them <img src="http://www.skylinesaustralia.com/forums/style_emoticons/default/sad.gif" style="vertical-align:middle" emoid=":3some:" border="0" alt="sad.gif" /><br />
<br /><br /><br />

its a real nuisance about o.e.m R34 coils but there is no option except pull your coils out and find the duds - my experience was Code 21 randomly appearing first with absolutely no noticeable effect but within less than a 1000k big trouble - it was suddenly so bad it was virtually undriveable luckily I was only about 3 k from home so ran it back anyway on about 4 cylinders as it was early Sunday and no traffic about - not a nice experience - hardly made it back - put in new coils and instant new car feeling!

this is what you need to do.

Take the kick panel off, take the ecu out of the car (undo the 10mm bolt) unplug ecu from harness.

Then plug the ECU back in, when you put it in just tightening up the 10ml bolt is NOT good enough, give the bolt 2 turns then push the plug in on EACH side then repeat this untill the bolt is tight.

Make sure the ECU is pluged in ALL the way and there is no gap. I have seen this happen on countless nissans where people DON"T put the ecu back in properly and they get error codes and engine lights because a sensor does not have a good enough connection.

Try this and let me know how it goes before spending big $$$ on coil packs. Even if it looks like its connected properly, still take it out and put it back in the same i explained.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...