Jump to content
SAU Community

Stealthy Boost Switch In Stageas

BIT SUS

By BIT SUS,
in Four Door Family & Wagoneers

 Share

Recommended Posts

BIT SUS Mentor

BIT SUS

Posted
Posted

Well tonight I had a fantastic idea. I wanted to hide my electronic boost controller (Profec B spec II) from the wrong eyes. A sort of set-and-forget attitude if you will. So I decided to wire up a Hi-Lo boost mode switch via the Wiper De-Icing Switch, located above the ignition barrel on the Stagea (S1). This not only is a conveniently located switch, but the dash remains entirely unmarked and keeps a factory appearance. Handy for when you don't want cops and theives looking around or asking questions. (I've been defected too many times with previous cars)

It was a pretty straightforward modification, and only took me around 20 minutes. (plus dinner)

Firstly I followed the steps for making a connector for the Profec B Spec II, in this thread:

http://www.skylinesaustralia.com/forums/Sw...l=profec+switch

But I then removed the De-Icing switch using a small flat bladed screwdriver, being carefull not to mark the surrouunding dash. Alternatively you could remove the switch from the back, by removing the neccessary panels (steering column covers then cluster surround)

After unplugging the switch, I stripped back the loom shield, and cut ALL the wires leading into the plug. Using the BLUE and GREEN wires only, I soldered these to the WHITE (+5V) and BLACK (Ground) wires on the "headphone" cable that leads into the back of the Profec B Spec II.

After taping up the loose wires and moving the Profec B Spec II into the coin tray, beneath the dash, I tested the switch and it all works fine.

I do realise that cutting ALL the wires from behind the switch no longer allows the use of the Wiper De-Icer, but since when am I going to use that in Australia anyway? Make sure you tape up all the loose wires from behind the switch, or they might accidentally trip the Relay or possibly short out.

I had considered wiring up the illumination bulb in the switch to show when hi-boost is selected, but realised that unfortunatelly the switch uses a shared ground with the Profec B Spec II and this would interfeer with the mode switching function.

Heres a pic of where the switch is located (this is not my car)

I will post up proper photos soon.

Enjoy!

Nigel.

Link to comment
https://www.sau.com.au/forums/topic/251995-stealthy-boost-switch-in-stageas/
Share on other sites
BIT SUS Mentor

BIT SUS

Posted
  • Author
Posted
Heres a pic of where the switch is located (this is not my car)

Did you miss this part?

My car is in pieces at the moment, so I could not take a photo, so I just used this one that I had on my laptop.

kidafa Veteran

kidafa

Posted
Posted
Your stag is shaping up to be fairly unique, with this and the door trim and the lights...

mate, you should see some of the other 260's here in adelaide that dont promote what they are doing to some of the people that troll our forums....

BIT SUS Mentor

BIT SUS

Posted
  • Author
Posted
mate, you should see some of the other 260's here in adelaide that dont promote what they are doing to some of the people that troll our forums....

Yeh for sure! i have seen ben's 260, yet to see nene's, seen adams and one other, but haven't seen any others that are modded.

BIT SUS Mentor

BIT SUS

Posted
  • Author
Posted
Doh! missed that.

Photos will be up shortly, maybe tomorrow night. I've only just put the car back together.

I had to jump start the car tonight because it hasn't been started in a fair while.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • luke gtr
      Did tie rods. Steering now not "springing" back.

      By luke gtr · Posted

      Good to hear. Hopefully you're happy enough not to notice when driving and just enjoy yourself.
    • luke gtr
      Returning after a long time!

      By luke gtr · Posted

      I mean, most of us just love cars. Doesnt necessarily have to be a skyline.
    • luke gtr
      Returning after a long time!

      By luke gtr · Posted

      Did you pick up a manual cluster to remove the position indicator?  (Pretty sure the 34 has the gear position in the cluster, but it's been a while)
    • 33GTRV
      Rb26 iron block limit

      By 33GTRV · Posted

      Here is a recipe. Sonic blocks till you get one that has a good enough bore. Get a torque plate and block brace, use your choice of fasteners (arp ect) bolt the thing together empty, half fill it and let it cure. Release it when it has, go to a REPUTABLE RB Builder and get the thing line bored/honed and cylinder honed to size, then wash. Once its all clean and dandy, wash and blow it out again. Then again.  Assemble said engine to your desired clearances with oil control mods, gasket to suit desired CR/Squish ect. Attach your extended sump with proper trap door oil baffles and head drain plumbed to sump with a SUMP BREATHER SYSTEM. Build your front diff with a decent LSD, rebuild your transfer case with a few extra plates, more than likely replace your tailshaft centre bearing and tighten up the rear diff. Tune to minimise excessive midrange cylinder pressure (timing unless you like to split bores and rebuild engines) Enjoy your engine, but hate the fact you are now destroying engine mounts, gearboxes, gearbox mounts, diff output flanges and driveshafts, diff mounts, tailshafts and front CV's.   Disclaimer.... Ive never done any of the aforementioned stuff.......
    • GTSBoy
      R32 GTS (RB20DE) Injectors Replacement

      By GTSBoy · Posted

      440s will support well over 400HP on petrol, which is a decent place to be for an RB20. 230+rwkW. Will be a safer bet for idle/low load. 550s would be nice for the extra headroom. I've made the same decision with mine (Neo25). 1000s are probably too big for the Nistuned ECU, so I have some smaller ones.
×
×
  • Create New...