Jump to content
SAU Community

Recommended Posts

bought this before i bought my stag, intended to hook it up to the xanavi screens in stageas.. which mine doesn't have lol it's been used also

it's a JVC KD-AVX1, has it's own 3" screen or you can hook it up to exterior screens like the factory one :)

want $250ono, alternatively i don't mind keeping it as i'm debating running it so i can fit a reverse camera :)

* DVD/CD receiver with built-in amplifier (20 watts RMS/50 peak x 4 channels)

* 3" TFT LCD monitor built into the motorised, fold-down faceplate

* On-screen display of JPEG images

* Plays DVDs, DVD-Rs, DVD-RWs, CDs, CD-Rs, CD-RWs, Video CDs, and MP3/WMA discs

* Giga MP3 capability — will play up to 100 hours of MP3/WMA files burned onto a single recordable DVD

* System control via front-panel control keys and menu system

* 7-band iEQ

* CD changer controls

* Audio/video input

* Backup camera input

* Audio/video output<<<<<<<<<<<<<<<<<<<<<<<

* Dual-zone mode

* 5-volt front, rear, and subwoofer preamp outputs

* Wireless remote

* DVD frequency response: 16-22,000 Hz

* DVD signal-to-noise ratio: 95 dB

* FM sensitivity: 11.3 dBf

b_kdavx1.jpg

can get actual pics on request

Link to comment
https://www.sau.com.au/forums/topic/252368-jvc-dvd-headunit/
Share on other sites

  • 2 weeks later...

hi ryan,

Mikes in adelaide. Chef stagea and I are doing a trip to Sydney on Monday to look at a Autech, so could maybe help out with something.

Mike sort something and talk to adam or myself and well c what we can do :)

hi ryan,

Mikes in adelaide. Chef stagea and I are doing a trip to Sydney on Monday to look at a Autech, so could maybe help out with something.

Mike sort something and talk to adam or myself and well c what we can do :P

Yeah that would be awesome if you could get the deck up here.

I think i was talking to Chef Stagea about a lift to Lane Cove to look at an Autech. I can't really help out during the week. After hours fine tho

Ryan,

I have a lift sorted in sydney. If you after the deck get onto it quick smart cos we fly out monday morning early so Mike needs to get it to one of us!

Also we wont be in sydney very long so we'll need to sort it out quick smart!

  • 2 weeks later...

Hey mate, i really want this deck please send with kidafa

i can direct deposit no worries or give cash to whoever you would like.

I would prefer Direct Deposit though

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
    • So M12 and sealant should be fine?    NPT ” because that’s what I had and what I could get atm. 
×
×
  • Create New...