Jump to content
SAU Community

Recommended Posts

hahahahahaha you get funnier with each post Daniel.

give up pal.

I aim to please.

You southerners always say give up but you have not really provided any proof that I am incorrect other than to say you have a mate in marketing who says it's an old trick. Gee I must be wrong if he said that.

I spoke , in person, to a rep from the company and then a couple of hours ago I spoke on the phone to another one. I asked if the injectors were just an off the shelf Denso item. He said absolutely not!. He said again that they were made by Denso to their specs. I asked him to put something in writing so I could show you but he told me not to waste my time with wankers and he doesn't care if you don't want their injector because of it. He said they have nothing to prove or gain by doing such a thing.

So this is an apology to you if he is lying to my face and if the guy in the states is lying to me over the phone. I am sorry if they are lying. But until you can PROVE that I am incorrect and they are lying to me, then why don't YOU give up and stop giving people misleading information. At least my comments have foundation to them.

Ferrari pal vrrom vrrom

---------------------

Suprised some over zealous god moderator hasn’t closed this shit down.

I believe it would be important to reveal the outcome of my investigation. I will wait to hear what Denso have to say. I think it is important information that everyone can benefit from. I'm not here to sling rocks at Dirt, I just want proof when someone says I'm wrong.

Umm from a third person viewing this all i have seen so far is:

3lit3 32 made some phone calls to some what substanuate his claim that these items are made by Denso to a cetain spec as specified by Power Enterprise.

Dirt Garage has said this is crap and PE only make the packaging for this, but not been able to back it up with any more proof.

I think the person asking the question has the information that yse they are a quality injector, now he needs to make a decision if he wants these instead of nismo ones, unless someone else has some proof to provide.

I aim to please.

You southerners always say give up but you have not really provided any proof that I am incorrect other than to say you have a mate in marketing who says it's an old trick. Gee I must be wrong if he said that.

I spoke , in person, to a rep from the company and then a couple of hours ago I spoke on the phone to another one. I asked if the injectors were just an off the shelf Denso item. He said absolutely not!. He said again that they were made by Denso to their specs. I asked him to put something in writing so I could show you but he told me not to waste my time with wankers and he doesn't care if you don't want their injector because of it. He said they have nothing to prove or gain by doing such a thing.

So this is an apology to you if he is lying to my face and if the guy in the states is lying to me over the phone. I am sorry if they are lying. But until you can PROVE that I am incorrect and they are lying to me, then why don't YOU give up and stop giving people misleading information. At least my comments have foundation to them.

he was reluctant to give you anything in writing because they know its all marketing crap...nothing more. He had everything to prove by releasing the information, he could have shown how their product is different/superior to everyone elses...but he chose not to. Actual proof that your product is superior in performance is a marketing bonanza...thats everything to gain from a profit point of view and would give them a hand over their competition. Instead he chose to be mature and call someone a wanker. Dan c'mon you must be able to smell a rat? Im not e-battleing with you over it...im over it. Ill order an injector and test them...i dont need to ask for a line off some PR guy on the phone etc.

you have your opinion and i have mine.

be friends shake hands and lets move it on ok.

its nice to be nice :happy:

Edited by DiRTgarage
Ferrari pal vrrom vrrom

---------------------

Suprised some over zealous god moderator hasn’t closed this shit down.

Now why would i close it down Josh?

You QLD'ers always provide solid entertainment no matter what section its in.

lol e-battle!

so does anyone have a price comparison on the pwr items vs sard?

It often depends on the supplier, if you check across nengun, greenline and various other places ive found sometimes one place has a better price than the other so it pays to shop around before buying

At the end of the day if denso are supplying an injector to sard and it has the same P/N as an injector supplied to PE then it's the same injector.

If they've changed it it'll have a different p/n

Someone make with the part numbers.

make sure you get the plugs with them as they are not the same as sards :)

can make sard plugs work if you cut off some lugs

used 700 pe's on a customers r34 gtr with no probs get a replacement connector

however turned in to nightmare

Whoa, holy shit?!?

If I understand correctly, you mean 700cc PEs into R34 GTR did not turn out well?? Can you please elaborate? Or PM me? I am due to get them installed tomorrow!

Thanks.

At the end of the day if denso are supplying an injector to sard and it has the same P/N as an injector supplied to PE then it's the same injector.

If they've changed it it'll have a different p/n

Someone make with the part numbers.

precisely Dave.

the part numbers are identical

I think the person asking the question has the information that yes they are a quality injector, now he needs to make a decision if he wants these instead of nismo ones, unless someone else has some proof to provide.

Thank you.

Now why would i close it down Josh?

You QLD'ers always provide solid entertainment no matter what section its in.

What gave you the idea I meant you, Ash? There are two other moderators for this section. One I know for a fact dislikes my online persona a lot more then you.

Of course we would provide solid entertainment. It's the heat you see.

"make sure you get the plugs with them as they are not the same as sards

can make sard plugs work if you cut off some lugs

used 700 pe's on a customers r34 gtr with no probs getting a replacement connector

however turned in to nightmare"

errr?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah i found that alot of parts can be wrong or "very" hard to get the real right one. I already bought some brakes years ago on me "old" GT calipers and they were wrong too 😄  I told them too. Even send them pictures...but they said "EBC catalogue has them on my car... So i dont know what their answer will be. I call monday them and let them know that they are really not on my car. If they were they would be already on a car...
    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
×
×
  • Create New...