Jump to content
SAU Community

Toyota Mz20 Soarer

Glavas

By Glavas,
in For Sale (Private Whole cars only)

 Share

Recommended Posts

Glavas Contributor

Glavas

Posted
Posted

Contact: Aleks

Email: [email protected]

Phone: 0430 469 200

Location: Northern suburbs, Adelaide SA

Hi, sadly it's time for me to part with my MZ20 as I now have the funds to buy an R33 ;)

It's an '89, last year of build and also a face lifted model.

It's bare stock, no mods.

Rundown is basically.

- 7M-GTE ~160 - 170KW @ the rears

- 4 speed Auto

- Electric everything

- Digital dash

- Factory LSD in excellent condition

- 140,000km on the clock.

- Cruise control

- Head gasket replaced and new headstuds retorqued to appropriate level ( factory was not enough - causes trouble on 7Ms)

- Clarion CD player + 6x9's in the back.

- Many hoses replaced, professional cooling system flush done + new top radiator tank

1 of two for sale in South Australia, one of the cheapest for sale in all of OZ!

The exterior is a white pearl and grey two tone. The paint is immaculate.

Interior is tan suede (sp?) + brown leather. Interior immaculate, no burns, stain, nothing!

Car handles beautifully. Turbo is a high flow CT26 which hits 7psi by 3000rpm. Very responsive, surprising in a car this large.

Car still has the factory Soarer matching floor mats and also came factory with the chrome wind guards on the windows.

Dash is digital, which means tacho, speedo, fuel left and engine temp are all on there.

Climate control works, but does need regassing. You have controls for it on the steering wheel. Wheel is factory as I didn't want to lose that.

Rims are R32 GTS-T rims, though you'd all be able to tell that anyway :( bout 30% tread on rear 80% on front.

Owner before me kept the car in a shed and never drove it!

CONS

The only con is that the big end bearings are starting to wear. They cost $110 new, but labor is gonna be fairly expensive, but I think at the given price this is very fair. They've not deteriated to dangerous levels, they're still good for now.

Engine compression is excellent. When I bought the car it was serviced with penrite hpr20. has barely done 4000kms since then!

Car needs to sell in the next to weeks! Price is mildly negotiable, i've had many people calling for this price, but none can come through with the funds!

I have a deposit on a R33 so this car needs to go! ASAP

$5,000.

101_2511.jpg

101_2373.jpg

front.jpg

side1.jpg

side2.jpg

Back.jpg

30GT.jpg

101_2540.jpg

101_2541.jpg

101_2539.jpg

101_2513.jpg

Cheers,

Aleks

Link to comment
https://www.sau.com.au/forums/topic/253316-toyota-mz20-soarer/
Share on other sites
Glavas Contributor

Glavas

Posted
  • Author
Posted (edited)
Best toyota ever my AW11's, The ae86 trueno, The Supra TT all seem better...

Aw11's are weak even with the Z.

Ae86 is such a mad car i didn't even think of it when i made the title :D

And LOL SUPRA WHAT?

it's like an overweight soarer!.

Aleks

For the next 2 weeks $4000

In two weeks there will be no more urgency and price will go back to $5000. Get in while you can.

Aleks

Edited by Glavas

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • GTSBoy
      Freddy Plenum vs Genuine options RB25

      By GTSBoy · Posted

      My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • Murray_Calavera
      R33 persistent issues. P/steering and lag/misfire

      By Murray_Calavera · Posted

      There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...