Jump to content
SAU Community

Recommended Posts

yea but dude. it is sometimes hard to drive around all day in a fast car with out at least once wanting to wind out one gear.

i just say keep your eyes peeled

your car should be enjoyable to drive at any speed,40 or 110kmh so why the need to go faster ?

Jez

In my experience most of the speed camera operators tuck the sign around the end of the van so you don't see it until you're going past it - in which case it'd be too late to do anything anyway. So in my opinion makes little difference whether the van is marked/unmarked sign/no sign, if you see a late model van on the side of a nice straight bit of road with no other cars parked near it, always assume the worst.

Edited by R34mac

You don't need to be constantly looking at your speedo to know whether or not you are doing the speed limit. If your driving significantly faster than everyone else then clearly your speeding. You SHOULD notice if your car is going faster in than the speed limit anyway since doing 10km/hr over is rather significant enough to realise your car feels faster than usual.

The only time i don't do the speed limit is when i'm over taking. If i'm on the highway and theres some retard doing 80km/hr the whole time and theres currently a gap that'll require me going up to 120km/hr or so to get in front of him then i'll do that. So it'd suck if i got caught when over-taking but i guess thats just life.

In my experience most of the speed camera operators tuck the sign around the end of the van so you don't see it until you're going past it - in which case it'd be too late to do anything anyway. So in my opinion makes little difference whether the van is marked/unmarked sign/no sign, if you see a late model van on the side of a nice straight bit of road with no other cars parked near it, always assume the worst.

Agreed,

I see Dark Green Merc Vito vans up and down Mt Lindsay Hwy/Beaudesert Rd without fail at least once a week, and sure enough there is a tiny sign about 400x500mm tucked away in front of the van where you can only see it if you're looking for it, or driving in the opposite direction, and to top it off, you can barely see the "police" lettering on the sides fo the van due to the dark colour.

Furthermore, i saw a nice officer who had parked down a side street, maybe 50m down, and walked up to the intersection, standing behind a sign with his trusty camera out.

Essentially, if they want to slow people down, hiding and using unmarked vehicles isn't going to change anything since no one knows they're there.

It's been said 100 times, their goal is clearly not safety, but revenue raising.

Well im from bundy i travel a few K's too and from work every day and i did notice a champaign 4x4 on the side of the road didnt pay much attention to it because usally their all marked..

when i drove back past from lunch it was still there and noticed there was someone sitting in the back seat, looked alittle harder and yep sure enough it was a cop!

i thought to myself shit hes going to get a few people, the road he was sitting on is bad for speeding..

so its not just brisbane that these new unmarked cars are!

what's the difference if they're unmarked... the signs the cops the put up are small and you barely notice them as it is and the police signage is usually only on the side of the vehicle where you won't see it.

I cringe at the sight of any newish 4wd wagon on the side of the road. A lot of time it's just some jackoff who bought a huge 4wd and can't park in a regular car park so it's limited to the side of the road or the footpath.

i got pulled over for RBT in beenleigh.

Officers questions

1. Had anything to drink ?

2. nice car what is it ?

3. go good ?

4. whats been done to it ?

My answers

1. No, (made me blow into breathalyzer)

2. stagea, like a skyline with a wagon shell

3. i am going to willowbank soon so i will know then, but it drives really nice

4. suspension, catback 3", wheels

his reply - "thats f**king awesome, have a good night"

what a champ.

^

^ thats true

last sat nite i was driving down beaudesert road with my gf and a mate in the car. i was doing spot on 80km/h as per the speed limit at about 10pm and i passed 1 of those aurion patrol cars (he was turning right at a set of lights - mine were green and his were red).

it must have been a slow night or perhaps his quota for the evening had not been met - i do not know, but as i passed him he saw "skyline" on the back of my car and decided to make an illegal left hand turn so he could chase me down for a quote "random licence and breathlyzer check"

cop: have you been drinking 2nite?

me: no

cop: blow into this

me: k

cop: (blew 0.0) thats ok then

cop: while im here, open the hood

me: (thinking f**k!) ok

cop: (while looking directly at the stock standard turbo) is this car turboed?

me: (slight grin on my face) yeh it is. it came standard from nissan like that

cop: (keeps looking around) does this car have a blow off valve?

me: (still with a slight grin on my face) uhhh yeh...

cop: k... giv it a rev

me: how much of a rev, a little bit or really boot it?

cop: yeh really rev it

me: (reved it to 5.5k) k

cop: do it again

me: (again reved it to 5.5k) ok

cop: (has a bit more of a look) hold on a minute, let me check your ride height...

me: ok then

cop: (wonders round the back of the car and checks it then comes back me) ok it all seems good... have a good night

me: k THANKS!

i dont think he was interested in MY car - well he was, just not for the reasons u had Jezboosted... lol

so yeh... random breath test my ass!

Get a 50cc scooter! Yamaha Aerox are the Go! Brembo's and all!

Can hold it Flat, All day, Every day!

Even got pulled over for suspected speeding in hope island, Offered him a go to see if he could break my record! Idiot!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I mean, I can confirm the TPS is at 100%.... I can confirm when we installed the TB and setup the cable that the TB was indeed fully open at max pedal travel.. the same 'curve' (WRT MAP vs MAP) existed with the previous setup/TB/manifold as well... No, we did not do a run with no intake connected. I would love to go back in time to do such a run to rule out the intake. It would have also been good to do a run with the airbox lid off. There's a test there where increased IAT vs more available air could be a positive tradeoff. I remember taking the lid off my R34 Turbo setup back in the day and noticing a monster increase, even if IAT's did go up. Could be similar. Hard to test unless I find a very deserted road. 
    • That's actually encouraging to be honest. my motor was rebuild many years ago but it's probably done less than 30,000kms and fucc all limiter or drift, majority street / drag / roll racing. It'll be fine 💪🏼 I don't even have lines or a can for the cam breathers installed yet, there is zero oil residue or splatter on or around them, it drives beautifully so it seems healthy. Just a ticky lifter, yet they're almost brand new oem genuine Nissan and haven't done many kms at all...
    • Have you confirmed the throttle body goes to WOT (and stays there) during the run?
    • I'm having a problem. I think it was mentioned above somewhere but can't see it.  I'm stuck in the cycle of, sand, filler, low spot again, put filler, sand, low spot again, now i put filler again and a thicker portion which seems to have helped but I got low spots in other areas. In the image. Circled in red thats where the original low spot was and the shape is the same as the red out line. I've more or less fixed that (still low spot up the top but now I have low spots where the green circled part is.  Is likely the issue that I didn't start with a course sand paper? I sanded the filler with 240 to reduce the risk of not going to far but maybe the issue is that I'm only taking off enough material to remove some of the filler but not the high spots. I now started sanding with 120 and I think I'm seeing a difference. I did fix one dent the other 2 are f**ked and seems like I made another low spot which is indicated by the furthest green circle on the left handside. Any thoughts and solutions?   Also second image. All of these rock chips, can they be filled in with primer or do i need to fill them all with filler/putty? So many rock chips on mine lol.
    • Well, I had an Edward Lee's special edition odo windback car/motor with a RB25DET S2 and I put down 372kW with a good amount of track abuse for 1.5 years before the ring lands decided it didn't want to stick around anymore 🥲 But probably didn't help I kept on smashing try limiter on the track and a few skid pans.
×
×
  • Create New...