Jump to content
SAU Community

Recommended Posts

Hey Y'all.

Taking the 'R for a bit of a cruise this coming weekend, Driving to Lismore, then on Saturday and Sunday arvo/nights I'll be in the gold coast/brisbane.

Anyone keen to meet up? (Saturday is the best night, Sunday i'll be a tad busy).

Christian

Link to comment
https://www.sau.com.au/forums/topic/25413-fo-shizzy-prizank-in-da-hizouse/
Share on other sites

Originally posted by PranK

heh... i like that! ;) :headbang:

I was hoping you wouldn't get offended!

We'll just be doing the normal Gold Coast thing. If you want to ring me to see where we are, it's cool.

Broadwater carpark is directly across the road from Australia Fair. It's a big bitumen carpark that has about 1000 car's in it on a saturday night. I'm sure if you just get on the Gold Coast Highway and head north, you'll see most of the cars turning into there off the main road. We normally don't reach the carpark till about 9/9:30 once we've stopped at a million servos!! :rolleyes:

Let me know :(

Prank - Me and some others from SAU are hitting the booze in a major way on saturday night. 0411870159 if you want in. House Party.

Sunday morning we are having a very hungover dyno day. $20 a go.

Gimme a call either way.

Suck the Booooze!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...