Jump to content
SAU Community

Recommended Posts

Hey guys,

The quest continues to sell all the stuff ive collected over time, today ive got;

RB26 cams (pair)

They're standard, out of a 1995model motor, working fine when pulled out

Taken out due to an upgrade of 270deg cams

If you've got an RB20 they're a great upgrade, here's a clip of what they sound like dropped in to an rb20;

http://au.youtube.com/watch?v=VQW1AAPi4tc

Price is $135 delivered to anywhere in Australia.

PM me or post up here.

Cheers

-Steve

Link to comment
https://www.sau.com.au/forums/topic/254265-rb26-cams/
Share on other sites

Bumpo

Doesnt rb20 run a hydraulic lifter setup and the gtr a solid? Reason i ask is that i have an r32 rb25DE head i am putting on my rb30 and am looking for better cams, and i believe that the r32 rb20 and rb25 cams are similar?? if so this could be a cheap upgrade for me

cheers

Link to comment
https://www.sau.com.au/forums/topic/254265-rb26-cams/#findComment-4403682
Share on other sites

im assuming since noone is mentioning or asking about RB25DET applications for these cams means that they cannot be used for RB25DET and only the rb20 and 26....... i have no idea so any info would be awesome :happy:

Link to comment
https://www.sau.com.au/forums/topic/254265-rb26-cams/#findComment-4408856
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Its also worth mentioning that 30 years after it left the factory and god knows how many missed oil changes since, there is every possibility that one or more lifters are ticking because they are sticky/gummed up. To resolve that you need to pull the cams then pull each lifter, disassemble, clean, reassemble, soak in oil and re-install, and they should come up good as new.
    • What air filter are you running? Is it a panel filter in the stock air box, or a pod filter? Is the air filter the type that is oiled?   If you unplug the IACV, what rpm does the engine idle at?
    • Reading through the engine service manual their advice is do a cylinder balance test. Unplug one injector at a time and see if the idle drops a consistent RPM. You can also do this using a Consult cable which is easier. They also call for unplugging the power transistor, then with the engine off and the fuel rail unhooked from the manifold verifying that you have good fuel flow (even injection, no dripping/leaks, etc) when you twist the CAS by hand. Also verify the spark by pulling the spark plugs and allowing the plugs to ground and turning the CAS by hand. I would also start doing the sensor checks and idle valve checks in service manual. Make sure the MAF tests reasonably, the intake air regulator is sane, etc. You may have to get new spark plugs.
    • This sounds very old of me, however since buying the Tiguan shit box, my view on shit boxes have changed.
    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
×
×
  • Create New...