Jump to content
SAU Community

modded 95 m-spec r33 re-sale

YBSLO4

By YBSLO4,
in For Sale (Private Whole cars only)

 Share

Recommended Posts

YBSLO4 Proficient

YBSLO4

Posted
  • Author
Posted

Narp hate dyno's so never had it done, and didn't want to do it without a computer anyhow. The guy i go through fro stuff said without any problems it should pull about 240rwkw on 1 bar tuned with a computer (was looking at Wolf 3Dv4 & Power FC) which aint nuthin to blink at. Heaps more potential from there without any doubt. With that kinda power you could safely say easy 12's with good tread.

YBSLO4 Proficient

YBSLO4

Posted
  • Author
Posted

Pretty keen it will dude, sat down and calculated it all up and the possiblities as i was doing it all, and its quite achievable to get that kinda power but will need a computer and fuel pump and pressure reg. Nuthin much tho all the main exspensive work is done. Those mod's were next in line for it but need to sell it now so not going to spend any more. If a reg doesn't get the injectors flowing enough then possibly swapping to say some GTR injectors will do the job easy, but for daily driving dude its got enuff as it is untuned lol Its an awesome car, used to get comments everywhere on how well its kept.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      98 R34GTT 4k engine stumble

      By MBS206 · Posted

      List all of your mods. It sounds like an aftermarket ECU hitting rev limiter. Like a valet mode, or a cold rpm limiter? 
    • tylink720
      "Cheap" bolt on turbo on RB25DET NEO

      By tylink720 · Posted

      @Kapr Haha yeah thats the one. I missed that you had a built up engine, I wouldn't want to run it on there either then. It was good in my situation just to replace the original turbo on a stock engine. @MBS206Yep definitely not a replacement for anything name brand
    • Kapr
      "Cheap" bolt on turbo on RB25DET NEO

      By Kapr · Posted

      You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
    • Watermouse
      "Cheap" bolt on turbo on RB25DET NEO

      By Watermouse · Posted

      https://www.facebook.com/share/19kSVAc4tc/?mibextid=wwXIfr
    • Kinkstaah
      Airbox for +T

      By Kinkstaah · Posted

      It would be well worth deciding where you want to go and what you care about. Reliability of everything in a 34 drops MASSIVELY above the 300kw mark. Keeping everything going great at beyond that value will cost ten times the $. Clutches become shit, gearboxes (and engines/bottom ends) become consumable, traction becomes crap. The good news is looking legalish/actually being legal is slighly under the 300kw mark. I would make the assumption you want to ditch the stock plenum too and want to go a front facing unit of some description due to the cross flow. Do the bends on a return flow hurt? Not really. A couple of bends do make a difference but not nearly as much in a forced induction situation. Add 1psi of boost to overcome it. Nobody has ever gone and done a track session monitoring IAT then done a different session on a different intercooler and monitored IAT to see the difference here. All of the benefits here are likely in the "My engine is a forged consumable that I drive once a year because it needs a rebuild every year which takes 9 months of the year to complete" territory. It would be well worth deciding where you want to go and what you care about with this car.
×
×
  • Create New...