Jump to content
SAU Community

Recommended Posts

that's very good but i can't afford a S2 i don't think... haha

plus i HAVE sat in one and was VERY impressed

until the dude at (not naming names) said i can't aquire a V35 ANYWHERE for under 40K i was like

ohrly?

mate I am in Perth and a call like that about not getting one under $40K is rubbish. I got private sale 2 weeks ago a white coupe, 16000 kms (i believe genuine, not one sign of wear anywhere and still smell the leather), manual, series 2, premium, sunroof and optional 19" rims and that was a lot closer to $30k than $40k.

have a look around locally at private sales, its buyers market.

happy to take you for a spin too if you are interested in anything since you are a local fella.

On the topic of V35s do they have cruise control?

nope. the american g35's did (maybe premium only, but regardless, very common) but v35's didnt apart from the very rare speed-sensing cruise control but i think that was sedan only.

On the topic of V35s do they have cruise control?

not factory. I do a kit for them that you could pass as factory though. uses the OE controls on the wheel.

what happened to you rowan

it was sposed to be ceffys for life

now you're deciding for a coupe

noooo....who ever gets your ceff, better keep it in good condition or ima have to hunt them down and take it from them hahaha

mmm unless someone else is out driving my car then yeah i was haha but as far as im aware i was at my gf's the whole weekend haha

yeah new cars are nicer and you dont usually have to worry bout them falling apart or trying to source much needed unavailable parts

ive been looking at jzx100 chasers of late, but yeah cant wait to see what you get

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • also possibly backed up to my filler and shat down it! 🤣
    • Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
×
×
  • Create New...