Jump to content
SAU Community

Recommended Posts

The turbobygarrett site is showing some more turbine housing options for Garretts GT3582R turbocharger , you'd think these were what was needed to get the most from these turbos but need a serious T4 flanged manifold maybe something like the cast HKS RB26 one .

Sadly these housings are single scroll but maybe later TS ones will get the nod .

http://www.turbobygarrett.com/turbobygarre...R_714568_10.htm

Cheers A .

If you open that link I posted originally it shows a picture of one wearing the T4 flanged turbine housing , in the bottom RHS of that page it gives you the part no's and A/R ratios too .

740902-18 = 0.63 a/R

740902-17 = 0.82 a/R

740902-16 = 1.06 A/R .

Cheers A .

If you open that link I posted originally it shows a picture of one wearing the T4 flanged turbine housing , in the bottom RHS of that page it gives you the part no's and A/R ratios too .

740902-18 = 0.63 a/R

740902-17 = 0.82 a/R

740902-16 = 1.06 A/R .

Cheers A .

i can confirm that full-race does carry this. T4, 1.06 A/R, twin scroll. I am running it on my 26 now with a greddy T4 mani. i believe the TS turbine housing is made by ATP, but I am not sure.

i don't believe garrett makes a T4 TS themselves.

Edited by gawdzilla
I'd be interested to know how that combination works on an RB26 .

Cheers A .

Yes it would be interesting to compare the T4 1.06 to the T3 .78 GT35. IIRC Str8e180 was running the T3 .78 GT35 version on his RB26 and made nearly 400rwk's (with a few fuel issues). So you'd think the larger housing would be better still.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...