Jump to content
SAU Community

Recommended Posts

Location: North Side Brisbane

Contact Details: PM, [email protected] or call 0403 865 415

Will ship anywhere in Australia

GTR afms (pair) - $100

GTR clutch master cylinder - $110

GTR Brake Cylinder - $110

GTR BOV - $60

Blitz sbc icolor (brand new still in box) - $850

Oil cooler with all remote fittings and braided lines (suit GTR, Supra etc) - $350

GFB manual boost controler - $60

Vee Port BOV - $ 110

Piller with Blitz guages (boost, oil temp, temp) - $220

DBA 4000 Series rear rotors (Suit all Skylines) - $320

RB20 Redtop with loom (missing some parts) - $350

RB20 Gearbox - $450

GTR shifter - $35

Pics soon

Link to comment
https://www.sau.com.au/forums/topic/256814-parts-sale/
Share on other sites

Location: North Side Brisbane

Contact Details: PM, [email protected] or call 0403 865 415

Will ship anywhere in Australia

GTR afms (pair) - $100

GTR clutch master cylinder - $110

GTR Brake Cylinder - $110

GTR BOV - $60

Blitz sbc icolor (brand new still in box) - $850

Oil cooler with all remote fittings and braided lines (suit GTR, Supra etc) - $350

GFB manual boost controler - $60

GFB Vee Port BOV - $ 110

Piller with Blitz guages (boost, temp) - $220

DBA 4000 Series rear rotors (Suit all Skylines) - $320

RB20 Redtop with loom and computer (missing some parts) - $350

RB20 Gearbox - $450

GTR shifter - $35

BNR32 GTR Computer Retuned - $110

BNR32 GTR Loom - $250

GTR cast iron manifolds - $110

GTR Radiator Fan - $50

BNR32 GTR Cluster Dash - $25

BNR32 GTR Cam Gears (pair) - $25

R34 Pull clutch fork - $55

BNR32 GTR Center Guages - $55

BNR32 GTR Wiper motor - $35

img0094fr6.jpg

img0095xu6.jpg

img0107cs6.jpg

img0117hd6.jpg

img0218yy8.jpg

img0219wq6.jpg

img0220uh6.jpg

img0221ib8.jpg

img0222jg5.jpg

img0223ig0.jpg

img0224hk5.jpg

img0225xz7.jpg

img0226ct8.jpg

img0227ht4.jpg

img0228pe1.jpg

img0229gw2.jpg

img0230iy7.jpg

img0231uc6.jpg

img0232zt8.jpg

img0233vc1.jpg

img0234mw5.jpg

img5171dl1.jpg

img5174jh6.jpg

Link to comment
https://www.sau.com.au/forums/topic/256814-parts-sale/#findComment-4427477
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...