Jump to content
SAU Community

Recommended Posts

I have a 97 gtst s2 it's pretty stock I have been over a period of time replacing parts i.e. gaskets, radiator, heater core, coupling etc... my question is I am wanting to replace my fuel pump now with something like a Bosch 040 fuel pump. Will I need to replace my injectors or will they support this pump? Also do people recommend this pump or is there something else I should look at before I do this.

Link to comment
https://www.sau.com.au/forums/topic/257207-fuel-pump-requirements/
Share on other sites

I have a 97 gtst s2 it's pretty stock I have been over a period of time replacing parts i.e. gaskets, radiator, heater core, coupling etc... my question is I am wanting to replace my fuel pump now with something like a Bosch 040 fuel pump. Will I need to replace my injectors or will they support this pump? Also do people recommend this pump or is there something else I should look at before I do this.

well what sort of mods are you looking at?

you would at least need it to be dyno tuned to get it running properly

To tell you the truth I haven't really thought about it much all I'm doing at the moment is pretty much replacing parts. I spoke to a guy in Marrickville and mentioned about getting some work done, he said that the best bet is to put a new fuel pump in dyno it then think about doing other things.

A couple of people I have spoken to say to put in a FMIC but I don't really see the point of putting one in whilst having stock turbo so until I am ready to do a upgrade I'd prefer to wait.

As for mods like I said I don't really have any, I've just mainly been replacing parts:

parts that I have replaced so far:

suspension (front/rear)

viscous coupling

radiator

timing belt

engine belts

gaskets

heater core

thermostat

(kept all up-to-date servicing)

mods:

turbo timer

exhaust

aftermarket radiator

Eventually I will want to do a turbo upgrade (no idea what one/type) until then I am just wanting to get it performing nicely (I know I am and maybe already have replaced parts I did not need to, but call me paranoid but I just like knowing that such and such is a new part and is working correctly).

To tell you the truth I haven't really thought about it much all I'm doing at the moment is pretty much replacing parts. I spoke to a guy in Marrickville and mentioned about getting some work done, he said that the best bet is to put a new fuel pump in dyno it then think about doing other things.

A couple of people I have spoken to say to put in a FMIC but I don't really see the point of putting one in whilst having stock turbo so until I am ready to do a upgrade I'd prefer to wait.

As for mods like I said I don't really have any, I've just mainly been replacing parts:

parts that I have replaced so far:

suspension (front/rear)

viscous coupling

radiator

timing belt

engine belts

gaskets

heater core

thermostat

(kept all up-to-date servicing)

mods:

turbo timer

exhaust

aftermarket radiator

Eventually I will want to do a turbo upgrade (no idea what one/type) until then I am just wanting to get it performing nicely (I know I am and maybe already have replaced parts I did not need to, but call me paranoid but I just like knowing that such and such is a new part and is working correctly).

well seriously

the thing is....if your replacing a top of the line fuel pump for eg..and not getting the mods.....then its kinda pointless...

but i think you should replace a simillar kind of pump whilst getting a dyno tune.

but

there some workshops may want the work u know...

i think the second mob you mentioned, says its pointless getting a high end pump...

if you really need to replace it....then id say replace the pump with a tune up.

mods can always come later on

well seriously

the thing is....if your replacing a top of the line fuel pump for eg..and not getting the mods.....then its kinda pointless...

but i think you should replace a simillar kind of pump whilst getting a dyno tune.

but

there some workshops may want the work u know...

i think the second mob you mentioned, says its pointless getting a high end pump...

if you really need to replace it....then id say replace the pump with a tune up.

mods can always come later on

I'm not saying I'm not getting mods I just ment that until I go through and get the engine and the rest of my car up to a good running condition I'm not going to do anything extra.

So as a starting point I figure once I have got this done why not start by getting a fuel pump in a dyno the car, and if that the correct starting point will the fuel pump mentioned be supported by stock injectors or will they need replacing at the same time?

If replacing the fuel pump and putting the car on the dyno isn't the correct starting point, then what is? What I ment about not getting a FMIC is because the car has a stock turbo I may as well until I do a turbo upgrade keep the stock intercooler and then do the whole upgrade i.e. turbo, intercooler etc...

So am I right in thinking this is a good starting point or not?

Thanks,

I'm not saying I'm not getting mods I just ment that until I go through and get the engine and the rest of my car up to a good running condition I'm not going to do anything extra.

So as a starting point I figure once I have got this done why not start by getting a fuel pump in a dyno the car, and if that the correct starting point will the fuel pump mentioned be supported by stock injectors or will they need replacing at the same time?

If replacing the fuel pump and putting the car on the dyno isn't the correct starting point, then what is? What I ment about not getting a FMIC is because the car has a stock turbo I may as well until I do a turbo upgrade keep the stock intercooler and then do the whole upgrade i.e. turbo, intercooler etc...

So am I right in thinking this is a good starting point or not?

Thanks,

yes, replace the Fuel pump

get it tuned at the workshop by dyno...first

the ecu may need tuning as well

my question is I am wanting to replace my fuel pump now with something like a Bosch 040 fuel pump. Will I need to replace my injectors or will they support this pump?

So is anyone able to answer my actual initial question?

So is anyone able to answer my actual initial question?

As long as the FPR can flow the extra fuel back to the tank it will be fine. Measure pressure at fuel rail before and after, should be around 43psi.

If it can keep pressure at 43 psi at idle you will be OK.

As long as the FPR can flow the extra fuel back to the tank it will be fine. Measure pressure at fuel rail before and after, should be around 43psi.

If it can keep pressure at 43 psi at idle you will be OK.

great thanks mate.

edit:

damit why didn't that reply to your post - looks like i'm answering myself :P

Edited by Nimmo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...