Jump to content
SAU Community

Stagea S1 Wrecker

skidkid

By skidkid,
in Four Door Family & Wagoneers

 Share

Recommended Posts

skidkid Proficient

skidkid

Posted
Posted

Whilst ringing around today chasing an ecu for our S2 Stagea (still!!) I was able to find a few S1 Stageas being wrecked. They are in Qld. Thay are; A1 Nissan wrecking, Alljap auto parts and All auto imports. Thought I would share. Now can somebody please find me a S2 wrecker??

Link to comment
https://www.sau.com.au/forums/topic/257221-stagea-s1-wrecker/
Share on other sites
gebba54 Collaborator

gebba54

Posted
Posted
Whilst ringing around today chasing an ecu for our S2 Stagea (still!!) I was able to find a few S1 Stageas being wrecked. They are in Qld. Thay are; A1 Nissan wrecking, Alljap auto parts and All auto imports. Thought I would share. Now can somebody please find me a S2 wrecker??

I've seen a few ECUs on Yahoo japan (import monster). might be worth a try if you can't find one locally. also New Zealand ( wreckers would be good for small things (Stagea parts are easier to get over there) and you win on the exchange rate.

deanoss Enthusiast

deanoss

Posted
Posted
Whilst ringing around today chasing an ecu for our S2 Stagea (still!!) I was able to find a few S1 Stageas being wrecked. They are in Qld. Thay are; A1 Nissan wrecking, Alljap auto parts and All auto imports. Thought I would share. Now can somebody please find me a S2 wrecker??
mob in sa i think its called niswreck. I will post the ling if I can find it again
QWK32 Veteran

QWK32

Posted
Posted
Whilst ringing around today chasing an ecu for our S2 Stagea (still!!) I was able to find a few S1 Stageas being wrecked. They are in Qld. Thay are; A1 Nissan wrecking, Alljap auto parts and All auto imports. Thought I would share. Now can somebody please find me a S2 wrecker??

wow, it must me hard to find S2 wreck if you are trying up here in QLD.

*in bold* did you mean All Automotive Import Parts, ph: 0737156474 located in Seventeen Mile Rock (brisbane). they have always had what i' been chasing.

skidkid Proficient

skidkid

Posted
  • Author
Posted

He did make the time to ring back with part number. My wagon is an 8/98 with a part number of 23740 0V810. A bloke I work with has an 11/99 with part number of 23740 0V811. Same car specs. Turbo, auto, awd. I have the rest of details but my local nissan said that the above was all that they needed to supply me a new one.

QWK32 Veteran

QWK32

Posted
Posted

a quick look on fast tells me that those two part numbers seem to be the only two ecu's that can be use for an S2 auto RS Four V turbo. mine has the 23740 0v811 and i have a 08/99 auto RS4V turbo.

so your getting a new one from nissan? i hope your sitting down when they tell you the price, i dont think it will be cheap :wave:

skidkid Proficient

skidkid

Posted
  • Author
Posted

EDIT to my last post. AAIP didn't make the time to ring through part no. I don't want to have buy one from nissan. It has allready taken my local nissan a week to not reply to my enquiry. Would be nice to find out difference in computers and if a 99' comp. will run my 98'.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • EndZee
      R33 Gts/-t Abs Module Wiring Schematic (not Gt-r)

      By EndZee · Posted

      Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • dyl33
      VOLK RACING GTC CENTRE CAPS

      By dyl33 · Posted

      Centre caps $250
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...