Jump to content
SAU Community

Recommended Posts

Whilst ringing around today chasing an ecu for our S2 Stagea (still!!) I was able to find a few S1 Stageas being wrecked. They are in Qld. Thay are; A1 Nissan wrecking, Alljap auto parts and All auto imports. Thought I would share. Now can somebody please find me a S2 wrecker??

Link to comment
https://www.sau.com.au/forums/topic/257221-stagea-s1-wrecker/
Share on other sites

Whilst ringing around today chasing an ecu for our S2 Stagea (still!!) I was able to find a few S1 Stageas being wrecked. They are in Qld. Thay are; A1 Nissan wrecking, Alljap auto parts and All auto imports. Thought I would share. Now can somebody please find me a S2 wrecker??

I've seen a few ECUs on Yahoo japan (import monster). might be worth a try if you can't find one locally. also New Zealand ( wreckers would be good for small things (Stagea parts are easier to get over there) and you win on the exchange rate.

Whilst ringing around today chasing an ecu for our S2 Stagea (still!!) I was able to find a few S1 Stageas being wrecked. They are in Qld. Thay are; A1 Nissan wrecking, Alljap auto parts and All auto imports. Thought I would share. Now can somebody please find me a S2 wrecker??
mob in sa i think its called niswreck. I will post the ling if I can find it again
Whilst ringing around today chasing an ecu for our S2 Stagea (still!!) I was able to find a few S1 Stageas being wrecked. They are in Qld. Thay are; A1 Nissan wrecking, Alljap auto parts and All auto imports. Thought I would share. Now can somebody please find me a S2 wrecker??

wow, it must me hard to find S2 wreck if you are trying up here in QLD.

*in bold* did you mean All Automotive Import Parts, ph: 0737156474 located in Seventeen Mile Rock (brisbane). they have always had what i' been chasing.

He did make the time to ring back with part number. My wagon is an 8/98 with a part number of 23740 0V810. A bloke I work with has an 11/99 with part number of 23740 0V811. Same car specs. Turbo, auto, awd. I have the rest of details but my local nissan said that the above was all that they needed to supply me a new one.

a quick look on fast tells me that those two part numbers seem to be the only two ecu's that can be use for an S2 auto RS Four V turbo. mine has the 23740 0v811 and i have a 08/99 auto RS4V turbo.

so your getting a new one from nissan? i hope your sitting down when they tell you the price, i dont think it will be cheap :wave:

EDIT to my last post. AAIP didn't make the time to ring through part no. I don't want to have buy one from nissan. It has allready taken my local nissan a week to not reply to my enquiry. Would be nice to find out difference in computers and if a 99' comp. will run my 98'.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Absolutely could be. I collected data logs from when the O2 sensor was still out and also after I had replaced it so will try to compare them. Pretty confident that the affect is lowered with the new sensor, will check logs at the same RPMs/conditions. 
    • Hey guys Long time lurker, I daily a nm35 stagea 250t rs four and I've had it for almost 2 years (very reliable 👌). Issues or just looking for information ill always find myself here having a read, so thought id join.  3inch stainless intake, pod filter, AM performance turbo dump pipe, 3inch hotdog, 3 and half inch stainless to 3 and half inch AM performance blast pipes. Bc racing coilovers. 18inch rims Hdi intercooler and trans cooler soon.  Here's my car
    • thanks for the advice on the box... i was thinking the 6 speed was better for cruising on the highway but on closer inspection and comparison the Rb 5 speed box was not too different...  So the choice is going to be the RB25 box... if I can save up and find one at the right price  
    • Thanks Matt, yes that's what i am aiming for. Just going to apply the right voltage and grounds to the dash connector. Hence my search for these pins... any chance you know if these pins are in the same spot as the ones on the S15 Dash connector? as mentioned above on page 8?
    • Yes, unfortunately that's the one. Signal was noisy to begin with; after driving once and looking back at the logs I saw pressure constantly swinging between 0-200psi, or staying at 0 randomly for a few seconds. There's a lot of good sensors that share the same look and feel, so don't presume they're all bad. I bought mine for 20$ off Amazon and I should have read the reviews prior, as it's clear they're junk.  I purchased a lowdollerr motorsports sensor. 
×
×
  • Create New...