Jump to content
SAU Community

Recommended Posts

  • 3 weeks later...
  • 1 month later...
BRAND NEW HALTECH NEVER USED FOR $1800 WITH RB25DET PATCH LOOM,MAP AND ALL THE SENSORS YOU NEED

Because the new Haltech P-sports2000 ecu is out, the E11V2 has dropped in price, there's a store in NZ listing on Ebay.com.au for about $1500 with the plug n play patch loom and 3 bar MAP sensor. I'll offer you $1350 for what you have here. Let me know

Here are all the goodies to get the hp out of your skyline,I recently brought most of these parts brand new for the build on my Rb25det in my R33 ser2.but now i need the money so selling it all. contact me on 0422 361 904 or on here cheers jack.located on the gold coast.

New Haltech E11 V2,Rb25 patch loom,RB25DET fuel map,air temp sensor,3bar map sensor,lap top dongle,start up guide and software CD.

Paid $2335 sell for $2150 with receipt from haltech.

New CPC Custom Plenum Creations,This plenum is custom made by cpc specially for RB25s,designed in house and computerised flow tested to ensure the best efficiency.has the plate on the rear for an iac valve has not been tapped or drilled so you still have the option not to run it,and all the vac holes are tapped on the bottom along with fittings.Throttle body flange is for standard rb25 throttle body direct fit.

Paid $880 sell for $820

Second hand Garrett GT35R ball bearing turbo,polished .70 compressor housing, .63 exhuast housing.comes with braided oil and water lines with speedflow fittings for the block too.all to suit an Rb25 top mount manifold setup.also comes with an original garrett turbo blanket.this turbo only did 10,000 kms no shaft play practically brandnew, $1200

New magna fuel reg with liquid filled turbosmart guage,steady pressure upto 700hp

paid $340 sell $300

New 6 X siemens 870cc 14mm Top feed injectors with O-rings

paid $540 sell $500 with receipt from injectors online.

New 14mm Billet fuel rail

paid $150 sell $100

Second hand 45mm Turbosmart progate,with V band clamp onto manifold unsure what spring tension.

sell $400

New HKS super fire spark plugs,Iridium and platinum,to suit rb25det M35i

paid $180 sell $150

New K & N pod filter 4"

$60

New vac block $80

Second hand standard R33 series 2 fuel pump

$60

Second hand Drift oil catch can with bracket $40

post-32953-1234791555_thumb.jpgpost-32953-1234791651_thumb.jpgpost-19795-1124701954.jpgpost-32953-1234791781_thumb.jpgpost-32953-1234791841_thumb.jpg

[

attachment=207015:IMG_0026.JPG]post-32953-1234791959_thumb.jpgpost-3069-1138843885.jpgpost-32953-1234792079_thumb.jpgpost-32953-1234792158_thumb.jpg[a

t

tachment=207020:IMG_0001.JPG]post-32953-1234792285_thumb.jpgpost-32953-1234792353_thumb.jpgpost-32953-1234792417_thumb.jpgpost-32953-1234792484_thumb.jpg[att

a

chment=207025:IMG_0012.JPG]post-32953-1234792607_thumb.jpgpost-32953-1234792668_thumb.jpgpost-32953-1234792728_thumb.jpg

The .63 housing on the GT35 is way too small. .82 is perfect for the 2.5 litre and the 1.06 for the 3 litre.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...