Jump to content
SAU Community

Stripping R32 4 Door - Engine Rb20de + Gb - Interior - Etc

Drift Motorsport
 Share

Recommended Posts

Drift Motorsport Community Regular

Drift Motorsport

Posted
Posted

Hey Guys,

I'm building up the D-Project / Driftshop R32 4 door drift car and I have some goodies for your car that I dont need.

The car was imported for parts ages ago and was only driven on the road with trade plates.

Nothing special here in terms of performance - but at least you have a decent option if you have blown a motor etc.

RB20DE Engine complete w/Inlet/Exhaust manifold, Loom, etc - 110,00 kms (will confirm) - $750ono

RB20DE Auto Gearbox - Drives like it is still new - shifts hard - $250ono

R32 4 door Interior - Complete - $400

Front/Rear/Roof/Door Trims/Dash/etc - from $49 a piece.

Dash Cluster (will update kms) - $49

4 Door Power window regs - $49ea

4 Door window glass - $49ea

Bits of loom / interior wiring / switches- from $10

Basically the car is getting stripped down to a bare rolling shell with all panels and no engine/driveline/interior and going on a massive weight reduction for the track.

I can freight all around Australia - however things like engines and so forth will need to be put on pallet for transit.

Post up what you need in the thread and I will get back to you on a price. I can freight non engine/gb stuff anywhere in Australia.

Pics TBA.

KURAUN Grand Master

KURAUN

Posted
Posted

duno if its the same thing as chris wants but i need the rear passenger piller trim where the seatbelt comes through

as long as its not broken

Drift Motorsport Community Regular

Drift Motorsport

Posted
  • Author
Posted

Thanks for the messages guys. I will take photos in and out of the car for you.

I will confirm the rest of the details thursday/friday.

The goods will be sold on a first come - first serve basis.

I also have all the seatbelts which should be in very good condition.

4DR R32 - From memory the dash and console is 100% ok no cracks etc.

CeJay - just to confirm - You are after the plastic trims that are between the windscreen and front door.

GTST-Sedan - That part is available.

Drift Motorsport Community Regular

Drift Motorsport

Posted
  • Author
Posted

AC System parts also available - great if you have had a front end stack!

Simonster - It will be sold - but it will be one of the last things to sell as I need to find replacement plexiglass and need access to the windows so I can move them up and down. If you dont mind waiting 2-3 weeks - its yours for $35 delivered.

GTS-T_Sedan - C Pillar Trims - $25 each + Freight. Are you after left or right or both?

CeJay Grand Master

CeJay

Posted
Posted
Thanks for the messages guys. I will take photos in and out of the car for you.

I will confirm the rest of the details thursday/friday.

The goods will be sold on a first come - first serve basis.

I also have all the seatbelts which should be in very good condition.

4DR R32 - From memory the dash and console is 100% ok no cracks etc.

CeJay - just to confirm - You are after the plastic trims that are between the windscreen and front door.

GTST-Sedan - That part is available.

Yes I'm after the plastic strip between the windscreen and the door, that goes from the dash to the roofliner. (Think it's the called the A pillar) Not interested if they are damaged though, as both of mine are broken and brittle on the top section.

Also the rear seats, but only if they are the velour.

Might also be interested in the passenger side belt buckle, but thats depending on what it looks like.

thanks

Excess Proficient

Excess

Posted
Posted

I m after the dash if its in good condition? also parcel shelf and may be some rear trims if they are not gone..

giving you a call tomorrow regarding pick ups

thanks

KURAUN Grand Master

KURAUN

Posted
Posted
AC System parts also available - great if you have had a front end stack!

Simonster - It will be sold - but it will be one of the last things to sell as I need to find replacement plexiglass and need access to the windows so I can move them up and down. If you dont mind waiting 2-3 weeks - its yours for $35 delivered.

GTS-T_Sedan - C Pillar Trims - $25 each + Freight. Are you after left or right or both?

yeh just need the passenger side one

will you be at the SAU renewal day on saturday at Kamakazie?

if so ill be there instead of posting it

otherwise ill have to get it posted

edit: also do you hav ethe door scuff plates in gc?

how much for the set?

Drift Motorsport Community Regular

Drift Motorsport

Posted
  • Author
Posted

Ok guys,

I've had a few PMs and orders and I will be stripping the car late next week provided the weather is good.

Everything on the car is 100% good, but I may break it removing it. I will let the interested parties know the condition after I have removed it. 15+ year old plastics tend to be very fragile at the clips.

The interior is NOT velour as it was a non turbo - RB20 spec car.

Please do not call me regarding the parts on the car. PM or post here..

I do not want to be called for the simple fact that there are at least 10 people after parts and im not sure who you may be on the phone and I wont be able to organise and allocate the stock properly.

My preference is to deliver items than to have them picked up as I do not have the time. I may be able to offer a time window where people can come down and pick the goods up. Delivery to Melbourne Metro via couriers please is from $15 for up to 25kg. Considering the fuel cost and time - delivery works out to be nearly break even or cheaper in some cases.

Door Scuff plates - $55

Passenger Seatbelt Buckle - the one next to the console - $35

Window glass, switches and regulators have been withdrawn from sale due to lexan/plexiglass costing too much and not worth the the money for the weight save / inconvenience.

I'll update this thread shortly.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • GTSBoy
      Freddy Plenum vs Genuine options RB25

      By GTSBoy · Posted

      My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • Murray_Calavera
      R33 persistent issues. P/steering and lag/misfire

      By Murray_Calavera · Posted

      There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...