Jump to content
SAU Community

Fs: R32 Gtr Struts With Lowered Springs

injected
 Share

Recommended Posts

injected Rookie

injected

Posted
Posted (edited)

For sale:

Set of 4 springs and KYB "New SR Special" dampers to suit R32 GTR. Springs sit the car at around 345mm centre to guard front, and around 355mm centre to guard rear. Approx. 1" lower than standard. In good working condition. Rear dust boots split, fronts are OK as can be seen in picture below.

KYB's are reported to be slightly firmer than stock which feels about right. A search on "KYB New SR special" shows up some info.

Located in Sydney. Prefer pickup, but if item fails to sell in Sydney, then I'll consider interstate (costs around $30).

$120 for the set. PM or ring 0407 294 275 if you're interested.

KYB_shocks.jpg

Edited by injected
  • 3 months later...
injected Rookie

injected

Posted
  • Author
Posted

Can the person that sent me a PM regarding these please contact me via SMS or phone on 0407 294 275. The struts are still available. I can't PM because of some rule not allowing PM until I post more than 10 times :(, so I can't reply to your PM. Sorry for the inconvenience.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Starting again

      By MBS206 · Posted

      The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
    • MBS206
      What brakes on R34 GTT(Europe)

      By MBS206 · Posted

      Just like in being 14mm too small (296mm) makes it not fit, being 14mm too big (324mm) it also won't fit. You want to find the correct rotor.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
    • Ozdavroz
      Starting again

      By Ozdavroz · Posted

      I started removing the tank a while back with the intent to give it a proper clean. Got to a bolt that I couldn't undo completely due to a diff being in the way, so just said f**k it and siphoned the gluggy old fuel out and called it a day. Looking it the tank it looks less corroded than the one in the pics for that billet hanger from Frenchy's anyway. Isn't it the fuel filters job to worry about this stuff? I scraped off most the crusty shit of the hanger but will give it another go before reinstall coz maybe the fuel and return pipes are also full of gunk  
    • sonicii
      Steering lock/control unit Infiniti G37

      By sonicii · Posted

      Pretty sure it is a common fault. I believe this is the only part you need, but don't quote me as I don't have a V36.  I also believe it is a bit of a pain to change and the device needs to be encoded to the car once it is replaced, so may need someone with the right tools. Buy Genuine Nissan 48700JF00D (48700-JF00D) Lock Set-Steering. Prices, fast shipping, photos, weight - Amayama
×
×
  • Create New...