Jump to content
SAU Community

Recommended Posts

belkinn1.jpg

Overview:

The N1 Vision wireless router offers an easy way for you to view your network's broadband speed, computer bandwidth usage, and the status of your connected devices - all from an easy-to-read display.

Packaged in a new sleek and sophisticated design, N1 Vision offers the best in networking performance with its wireless 802.11n* 3x3 radio design and wired gigabit ports. The N1 Vision wireless router continues Belkin's commitment in providing the best user experience in the home market through its Plug-and-Play "CD-less" installation and simple network security setup.

Features:

Interactive Status Display shows your network's broadband speed, computer bandwidth usage,the status of connected network devices, and more. Plug-and-Play CD-less setup Easy Security Setup with support for Wi-Fi Protected Setup™ and Multiple SSID 802.11n draft 2.0 compatible - 3x3 radio design provides excellent speeds and complete wireless coverage 4 Gigabit Ports

1018-N1-Vision.jpg

Specifications:

Browser Based Management Browser Based Management

Link Rate Up to 300 Mbps in 20/40MHz Channel Mode

Maximum Users 253 (LAN), 16 (WLAN)

Patent Pending LCD Connected Devices , Download/Upload Speedometer , Guest Access Network , Network Display , Usage

Plug and Play Setup Plug and Play Setup

Ports WAN-- 1 Gigabit Port LAN-- 4 Gigabit Ports

Range Up to 1,600ft*

Security Wi-Fi Protected Setup; WPA, WPA2-Personal, 64-bit/128-bit encryption, Multiple SSID

Specifications Standards IEEE 802.11b , IEEE 802.11g , IEEE 802.11n draft* , IEEE 802.3ab

VPN Support IPSec pass-through , PPTP

looks almost brand new.

all cables and softwares included.

RPR $399

asking price $250

belkinvision.jpg

Edited by isr3
Link to comment
https://www.sau.com.au/forums/topic/257906-belkin-n1-vision-mimo-modemrouter/
Share on other sites

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yes, I had ordered the spherical bushings at the same time as the rest. I have high hopes for the anti squat reduction kit. 
    • Make sure you use the spherical bushes** on the lower arms, ifyou do that. ** at least, if not the whole replacement lower arm.
    • The tap for coolant flow control will be stuck open. It's not just the air door motor that dies.
    • Not really, but the heater box is pretty simple mechanically....if the door is one way the air bypasses the heater core and if it is the other way it goes through it for warm air.  If you are sure the actuator you moved manually is for the heater mix (there would also be one for output air direction) then I'd take the heater box out and see what is happening (you'll have to regass and re-coolant the systems afterwards) BTW pp724 onwards from the GTR workshop manual cover the system in good detail, it is probably worth checking. I think the IAT sensor might be a problem electrically for getting cold (if you got 24 error code not -24 it thinks the incoming air is -50c) and it covers how to test the sensor (although most likely it is either not plugged in or a wire is damaged)
×
×
  • Create New...