Jump to content
SAU Community

Recommended Posts

hi ive got a 1993 r33 gts-t thats auto and ive noticed that when i take the radiator cap off its like a milkshake, ive checked the engine oil on the dipstick and under the filler cap and its all clean, and i took the trans cooler lines off the radiator and hooked them straight to the trans cooler at the front of the motor and flushed the coolant out and refilled it with new coolant. but then it still goes like a milkshake under the radiator cap its had nothing done to the engine still got stock turbo on. the car starts straiht away everytime and it never over heats, and the car still boosts fine a never misses a beat

i was just wondering if anyone would know wat the problem is at all or if anyones had then same problem, or maybe is it possible that coolent and oil could be getting mixed together through inside the turbo, cheers

Edited by nathan0511
Link to comment
https://www.sau.com.au/forums/topic/258218-need-help/
Share on other sites

hi ive got a 1993 r33 gts-t thats auto and ive noticed that when i take the radiator cap off its like a milkshake, ive checked the engine oil on the dipstick and under the filler cap and its all clean, and i took the trans cooler lines off the radiator and hooked them straight to the trans cooler at the front of the motor and flushed the coolant out and refilled it with new coolant. but then it still goes like a milkshake under the radiator cap its had nothing done to the engine still got stock turbo on. the car starts straiht away everytime and it never over heats, and the car still boosts fine a never misses a beat

i was just wondering if anyone would know wat the problem is at all or if anyones had then same problem, or maybe is it possible that coolent and oil could be getting mixed together through inside the turbo, cheers

sounds like you blown the head gasket

Link to comment
https://www.sau.com.au/forums/topic/258218-need-help/#findComment-4441584
Share on other sites

I dont really know if you have blown a headgasket as I am sure you would be seeing Choco milkshake effect in the engine oil,that and it would be most likely overheat. My guess is that the turbo has shit itself, allowing oil to mix with the water on that end.

Link to comment
https://www.sau.com.au/forums/topic/258218-need-help/#findComment-4441595
Share on other sites

I dont really know if you have blown a headgasket as I am sure you would be seeing Choco milkshake effect in the engine oil,that and it would be most likely overheat. My guess is that the turbo has shit itself, allowing oil to mix with the water on that end.

Yeah you could be right, but the drain out of the turbo goes back to the block, So it should be contaminated too. When you start the car and leave it running, take the radiator cap off and see if there are any bubbles in the radiator.

Are there any welsh plugs in the block between the oil and water galleries? One of these could be corroded.

I wouldn't continue to drive it though, until you get it checked out.

Link to comment
https://www.sau.com.au/forums/topic/258218-need-help/#findComment-4441613
Share on other sites

yeah ive decided to get a new turbo anyway and i pulled the inlet manifold off today and notice the back coolent passage in between cylinders 5 and 6 has a bit of milkshake in it so im gonna pull the head off tomorrow and hopefully havent done to much damage to the motor ill let u know wat i have found

Link to comment
https://www.sau.com.au/forums/topic/258218-need-help/#findComment-4442051
Share on other sites

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Block bump. $400. As above cyl 6 needs bore or sleeve.
    • I would think making the argument that the travel is limited by a spring flexing against a spring perch as "the same method". Later on in the document they do state that the spring can't bind on full bump travel and cannot come loose in full rebound travel as well. (which is all very sensible). The laws are actually pretty sensible and reasonable. It's just that the people who enforce and check them don't actually read them or know them accurately. "Oh, coilovers? Instant fail mate. Don't even need to look at it." - Guy who will be instantly reported by me. There is probably merit to people who do get defected for height also get defected for the suspension in that state that allows it. I did never consider the people who are complaining about coilovers being picked on are also running around at 50mm off the floor.
    • I think given SAU's knowledge of E85 we can strongly conclude that 10% ethanol in almost any situation is entirely fine. Almost all of the myths against E85 were overblown, let alone E10.
    • From your link See bold text, is this referring to damper settings, if so that may a issue for "some" inspectors, I cannot see aftermarket coilovers having the evidence that "must be available that its functional performance is equivalent to the original" Maybe just remove the adjustment knows and hope for the best???? Meh 5.2 Suspension travel In all instances, modifications to a vehicle’s suspension must ensure the integrity of the system and not compromise the ride quality. At least two thirds of the original suspension travel should be maintained in both directions (rebound (i.e. extension) and bump (i.e. compression)), and rebound must be limited by the same method used by the vehicle manufacturer or if this is not practicable due to the nature of the modification, an equivalent method. If an alternative method is used, evidence must be available that its functional performance is equivalent to the original.
    • They actually don't - They adhere to VSB14 rules just like Victoria. The rules are against CABIN adjustable height, and it quite clearly states that the height has to be within parameters. I asked the VASS engineer to confirm this when I got my car engineered and they refused to engineer the coilovers because they didn't meet the requirements for requiring engineering. (mine are height adjustable.) People "Not wanting to bother" with "Actually reading/knowing/adhering to the rules" should result in fines and immediately losing the ability to issue blue slips and/or RWC's in Vic.
×
×
  • Create New...