Jump to content
SAU Community

Carbon Fiber Bonet

Kerr34

By Kerr34,
in Western Australia

 Share

Recommended Posts

2LV8ETR Mentor

2LV8ETR

Posted
Posted
hey guys just wondering if people have any idea on cost, installation, where i can get them from and your opinions on looks

Greets man.

My opinion only:

Buy one yourself and install it yourself - it's just a few bolts and some lining up to do.

As far as getting them, try doing an online search and you'll find many places that have them. If you don't have a retailer close, just get them to ship it to your doorstep.

The other thing is they do look good. But unless you garage your car when not in use, they fade. I've got one on my race car and after 2 years it's fading.

Hope this helps.

Later!

Kerr34 Rising Star

Kerr34

Posted
  • Author
Posted
Greets man.

My opinion only:

Buy one yourself and install it yourself - it's just a few bolts and some lining up to do.

As far as getting them, try doing an online search and you'll find many places that have them. If you don't have a retailer close, just get them to ship it to your doorstep.

The other thing is they do look good. But unless you garage your car when not in use, they fade. I've got one on my race car and after 2 years it's fading.

Hope this helps.

Later!

just wondering about the fading how about if the car is permanently under a car cover (the ones that u put onto the car to stop wind rain etc. will that decrease the fading?

2LV8ETR Mentor

2LV8ETR

Posted
Posted
just wondering about the fading how about if the car is permanently under a car cover (the ones that u put onto the car to stop wind rain etc. will that decrease the fading?

Should do. It's only fading because the car is in direct sunlight all of the time.

PSI Parts Veteran

PSI Parts

Posted
Posted

Check to see if the car cover is UV resistant, along with a UV resistant clear coat, which can easily be reapplied if you are unhappy with the fading.

We might have some Z tune style hoods left, doing a stock take this week :down:

Char Experienced

Char

Posted
Posted (edited)

yer their illegal, insurance wont cover them,

they can have just a little problem what with possibly come thru ur windscreen and take ur head off

to quote Evman from just commodores

"The reason they're illegal is because they change the crash rating of the car. Where a metal bonnet would bend and buckle, a carbon fibre bonnet wouldn't. For example, if you hit a pedestrian, a carbon fibre bonnet would be more likelly to cut into the person rather than bend. Here's some trivia - one of the reasons the cost blew out on the Monaro 427 was because of it's carbon bonnet. The problem was, in a frontal impact, the bonnet would be pushed through the windscreen, into the driver and passenger. Scary really. "

Edited by Char
br3ndan Mentor

br3ndan

Posted
Posted

in wa is possible to get a permit for the bonnet.

As long as there isnt too many Vents and whatever crap on them.

How do i know this?

Ive seen a permit for a fibreglass bonnet with a sheet of carbon on top. Althought his one didnt have any vents on it.

R DIRTY 3 Grand Master

R DIRTY 3

Posted
Posted
yer their illegal, insurance wont cover them,

they can have just a little problem what with possibly come thru ur windscreen and take ur head off

to quote Evman from just commodores

"The reason they're illegal is because they change the crash rating of the car. Where a metal bonnet would bend and buckle, a carbon fibre bonnet wouldn't. For example, if you hit a pedestrian, a carbon fibre bonnet would be more likelly to cut into the person rather than bend. Here's some trivia - one of the reasons the cost blew out on the Monaro 427 was because of it's carbon bonnet. The problem was, in a frontal impact, the bonnet would be pushed through the windscreen, into the driver and passenger. Scary really. "

I think youll mind thats actually a myth....but its the right theory

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...