Jump to content
SAU Community

Relief In Sight For Aussie Importers, Car Enthusiasts Ect Ect


Recommended Posts

Japan exports drop 45% to new low!

http://news.bbc.co.uk/2/hi/asia-pacific/7909248.stm

Japan also had a trade deficit of 952.6 bn yen ($9.9bn; £6.8bn), the lowest figure since records began in 1979.

The demand for Japanese cars in particular dropped by 69%.

Demand for electronics and other goods has also slumped as global economies and consumer spending contract, pushing Japan deeper into recession.

I know this sounds bad, but with the Aussie dollar taking a wholloping over the last 5/4 months or so, this appears to be some relief in the short-middle term. If you understand how currency values fluctuate in the international market, you would see these export figures as a powerful and telling indicator that the Japanese Yen is likewise poised for an even greater fall.. So with less demand for Japanese products, also brings about in a depleation in demand for the Japanese currency, with a fall in demand also comes a drop in value. Therefore, if the value of the Japanese Yen is to drop, then even against our somewhat weaker Aussie dollar, imports from Japan (Electronics, Cars, Parts ect ect) should hence become cheaper for us once again! :D

*toot*

Edited by Marco-R34GTT

won't our dollar be low still as it was before, $1 AUD is still only buying 96 YEN whereas only a bit more than a year ago the AUD was buying as high 107 YEN?

someone please let me know, how will it look for exchange rates seeing as though Australia's economy is going okay where Japan's economy is going into recession?

won't our dollar be low still as it was before, $1 AUD is still only buying 96 YEN whereas only a bit more than a year ago the AUD was buying as high 107 YEN?

someone please let me know, how will it look for exchange rates seeing as though Australia's economy is going okay where Japan's economy is going into recession?

if you can get 96 yen for 1AUD, take it, then run!!!..

won't our dollar be low still as it was before, $1 AUD is still only buying 96 YEN whereas only a bit more than a year ago the AUD was buying as high 107 YEN?

someone please let me know, how will it look for exchange rates seeing as though Australia's economy is going okay where Japan's economy is going into recession?

Here is a good sight Andrew.

http://www.ozforex.com.au/

$1AUD is currently buying 63.5 Yen.

AUD vs JPY over the last 12 months:

http://www.chartflow.com/fx/historybasic.asp

Edited by Marco-R34GTT

japanese cakes rock my pants man

japanese.jpg

but srsly, with the whipping the australian dollar is getting at the moment, I dont think we can hope to see any real improvement, especially one that is going to be reflected in the price of parts, any time in the hear future. The price of cars is gonna takew a bit of a hit, but the truth is, even with the AU in freefall over the last 6 months, importing hasnt actually gone up in price anywhere near as much as you would expect, ergo we are already seeing the cost savings in that area.....

I think if the AUD/YEN it will still only be around high 60's - low 70's at very best for the moment 5 piont swing helps alot, the problem is though that the Japanese are buying alot of the 2nd hand stock and also new cars aren't selling, making it hard to buy good quality 2nd hand gear to send here - be interesting to see where it all ends up over the next six months.

Edited by OzCarImports

JAPANESE INDUSTRIAL OUTPUT PLUNGES!

Looks like our Japanese friends are in for some rough economic times.. This reiterates my point that a fall in the Yen should soon follow..

Here is some basic economic theory as to HOW this happens and what causes currencies to fluctuate on the international market..

http://en.wikipedia.org/wiki/Exchange_rate

JAPANESE INDUSTRIAL OUTPUT PLUNGES!

Looks like our Japanese friends are in for some rough economic times.. This reiterates my point that a fall in the Yen should soon follow..

Here is some basic economic theory as to HOW this happens and what causes currencies to fluctuate on the international market..

http://en.wikipedia.org/wiki/Exchange_rate

the fall in the yen (against USD) has already happened, down 8% for the week. However this isn't good news unless

you're american as it outlines that the ONLY safe place for money is now the USA, not switzerland, not Japan (and not australia).

So the aussie isn't going to shoot up anytime soon and it needs to, to make a dent on these import prices.

  • 2 weeks later...

The Yen is over valued as well though, I remember honda was calling for the japanese government to decrease the value of the yen or they were threatening to move offshore.

Hopefully we will see the yen come down in value which will offset the terrible AUD

Japan is a very large trade partner.

Japan's industry based on product supply from us = secodary and tertiary

Australia supplies primary product for this. Primary products attract the lowest value add.

If Japan gets a currency flogging so do we. It's not getting better anytime soon. There is still room for it to get worse.



  • Latest Posts

    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
×
×
  • Create New...