Jump to content
SAU Community

Recommended Posts

Prices are neg.

here are 4x r33 rims with brand new nexen 16/225/50 rubber. $550 the rims themselves have oxidized streaks in the clear coat. probably from brake fluid from previous owner. pick up. or interstate postage (buyer to pay). can deliver in sydney for $25.

DSCF3288.jpg

DSCF3291.jpg

here are 4 mazda eunos rims, no tyres, with the 114 pcd 5stud pattern. they fit the rear but will need spacers to fit the front. pick up. or interstate postage (buyer to pay). can deliver in sydney for $25.

DSCF3292.jpg

here are 3x 17 235s rubber only 1 is federal 595ss the others are falken 326's. pick up. but can deliver in sydney for $25.

DSCF3290.jpg

here is a stock r33 gtst exhaust system. minus the dump pipe. pick up. or interstate postage (buyer to pay). can deliver in sydney for $25.

DSCF3274.jpg

here is a gutted stock cat pipe. more flow :($10 pick up. or buyer pays post.

DSCF3264.jpg

here are stock r33 gtst front and rear sway bars with rubbers. $80 for both or $50 ea. pick up. or interstate postage (buyer to pay). can deliver in sydney for $25.

DSCF3266.jpg

here is a series 1 front bar for an r33 gtst. $70 pick up. can deliver in sydney for $25.

DSCF3275.jpg

here is a LHS fender it needs to be resprayed and pannel beated slightly for the dint and the headlight surround. it would do for a drift car though. the damage is minor. see pics. pick up only.

DSCF3268.jpg

DSCF3271.jpg

DSCF3270.jpg

here is a left over sheet of aluminum mesh.the largest part measures 59cm L x 27.5cm W. the but overall it is 121cm L. pick up only.

DSCF3267.jpg

here is a left over 4.10m roll of exhaust wrap. $25 pp

DSCF3283.jpg

here we have 2x universal racing harness's (one red and the other black). with all of the hardware to fit them. i will separate these. $60ea or $100 for the 2. pick up or buyer pays postage.

selling.jpg

here we have an r33 gtst s1 manual computer . $100 pick up. or interstate postage (buyer to pay). but can deliver in sydney for $25.

selling2.jpg

here we have a walbro 341-gss 255lph (with all the mounting gear plugs etc). it has the same internals and ratings as the 342-gss. the only difference being the outlet. the 341 has the outlet on the other side of the inlet. where as the 342 has it straight in line with the inlet. it will not make a difference whatsoever. $120 pick up. or interstate postage (buyer to pay).

selling4.jpg

here we have a r33 gtst used sard top intake sports induction kit with bolts to mount it. $50 pick up. or interstate postage (buyer to pay).

selling5.jpg

here we have 2x r33 gtst whiteline subframe split pineapples. these are split so they can be fitted to the upper part of the subframe bush. used to set the car at neutral stance when used with 2 other pineapples. $15 pick up. or interstate postage (buyer to pay).

selling8.jpg

here we have an r33 gtst stock gear knob and a 2.5" x 3" silicone/rubber intercooler pipe join. $15 for the join. $15 for the knob. pick up. or interstate postage (buyer to pay).

selling9.jpg

Craig.

04396961454

[email protected]

Edited by Trust33

here are the rest.

here are 2x r33 gtst stock mspec side skirts condition ok. and 1 LHS 400r nismo side skirt in primer still needs prep work. $80 for the mspec's and $40 for the 400r. pick up. or can deliver in sydney for $25.

DSCF2790.jpg

here is an r33 gtst stock radiator perfect condition. needs to be cleaned and flushed by a pro shop. $40 pick up. or interstate postage (buyer to pay).

DSCF3314.jpg

here are 2x front r33 gtst HKS hyper D adj height and damper coilovers 1 is fine the other is shagged. the pillow ball shaft has come apart from the main shaft. it made a knocking sounds before i took them out. will need a rebuild. there is a place in QLD that does these and a place in VIC as well. $60 for both. pick up. or interstate postage (buyer to pay).

DSCF3312.jpg

DSCF3313.jpg

here is a holden commodore VT washer bottle pump and a one way valve to stop leaks when the pump s not in use. for a DIY intercooler spray kit. $30 delivered.

DSCF3315.jpg

Craig.

04396961454

[email protected]

Edited by Trust33

$125 pick up or $150 delivered (by me) in syd.

there is another guy interested in it as well. i will give it to him if he still wants it. will msg him about it. if not u r next on the list.

no on the other things u asked about.

Edited by Trust33

wat are the chances we could meetup? i wont be able to make it to ingleburn for a while. ...u go city or anything? can always jus drop by or meet u somewhere wherever u are for that wrap, shoot over a PM

wat are the chances we could meetup? i wont be able to make it to ingleburn for a while. ...u go city or anything? can always jus drop by or meet u somewhere wherever u are for that wrap, shoot over a PM

i work at villawood. though i do go places from time to time. other than that there is the post. where are u located? and where are your usual haunts?

throw me a pm!

Edited by Trust33

err...u got an extra digit in ur phone number :S yea villawood would be awesome cos i drive thru there every arvo. i live in liverpool cbd

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...