Jump to content
SAU Community

Recommended Posts

SORRY ABOUT IT BEING INDY WEEKEND BUT THERE WAS NOT OTHER SPACE THIS MONTH.

When : 25th October

Time: 6:30pm - 11:00pm

Where : Kingston Park Raceway.

20 Mudgee Road, Kingston

30mins From Brisbane

25mins From GoldCoast

1hr20mins From SunshineCoast

NEED : Minimum Of 24 People Lets Make This A Big One.

Invite : R31SkylineClub QLD, SAU - QLD

Details - Will Need To Know What Level Of Racing Level 1 or 2, Level 2 Is The Longer Session

Price : Level 1 : 60$ pp

Level 2 : 70$ pp

We Need To All Be Doing The Same Level - As This Is Structured As A Team Even , Say if we get 80people there are 16Groups of 5 and each person gets a role in the team - driver, 2 co, drivers, crew etc. this then rotates untill each driver has completed their level (ie : l1 = 2x18 laps l2 = 3x18 laps).

We Will Have The Track To Ourselves And there Are Plenty Of BBQ's To Bring Meat And Stuff Along, for those who have youngin's under 16 there is other stuff for them to do, mini golf etc.etc. ?!?

The Karts used will be the Pro Karts (97km/h topspeed).

Confimation NEEDED by OCTOBER 21st (Monday)

We Can Make This A Competitive Event And Pay An Extra 50$ and Get 1st,2nd,3rd Trophies - This Cost We Could Split As A Group And Well The People That Take Out Those Places Will Be Able To Get Something To Remember The Nite With. This Will Also Promote Socializing With Other Club Members "Mark THIS ONE OUT IN YOUR CALENDER AND COME MEET AND GREET THE OTHER MEMBERS"

The Details Are Finalised, Please Forward Confirmation To : [email protected]

Just So We Know Who Will Be There, As We Need To Have Definate Numbers To Make These Type Of Days Go Off, And Give Us And The Members Discount And A Fun Day Out For The Family Children Over 16 For Kart Riding.

Regards,

Ashley Neal.

  • 2 weeks later...

Sorry Guys This Has Unfortunately Had To Be Cancelled As We Didn't Get Enough Numbers, Due To The Time Of Year Being Close To Xmas And All, Will Look At Re-Schedule It For Early Next Year After Xmas :P

Regards,

Ashley Neal.

Hummm I did all the ground work etc. i'm sure i mentioned that i needed all confirmation by 14th as i have to come up with deposit for the track on the 17th, and i have had not much response other than it is a bit expensive at the moment, which is understandable.

No Doubt I will organise another one for the 31 club or what have you. but i'm sure Slip, may be able to organise something..

Regards,

Ashley Neal.

I'm just being safe as i have no trouble to pay the deposit, its just i don't want to have to pay for everyone that doesn't show up for the evening, as i'm not that financially well off, to do that for the both clubs, Sorry guys.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...