Jump to content
SAU Community

Recommended Posts

researching this now. if there is an interest then I'll go ahead with it. box that I intend to use WILL play movies as well. it will use the OE screen and I'll make a blanking plate for the OE controls.

rough costing is in the $1-2K mark and will cover both generations.

I have a full replacement solution in the works as well. more info on that later.

so do I have interest?

Link to comment
https://www.sau.com.au/forums/topic/259714-touchscreen-navi/
Share on other sites

it would be a all in one box. no splitting it up. I have the other unit here now. picked it up this morn.

it would be a rework on some of the cars.

rianto. it would fix your volume issue as well ( I now have a FULL navi setup out of an 03 so thats what I'm basing this on.)

Danny (sydney)

its still at concept stage - not likely to go into production for at least 8-12 months. in that time I'll probably rework it 3-4 times to get it stable. so if you are going to buy a car based on this alone - dont.

Edited by Chris Rogers

its a full rework unless I can get more info on the GVN53 units. garmin aren't too forthgiving with that info..

current box I have in mind is entirely different. overlays are proving to be a pain as the early screens ARE NOT a true 7" screen.

ok - using the OE screen is out as far as I'm concerned. size of screen (6.9" diagonal) stops me from finding an overlay that fits. I can get one done but at $800 a shot and a minimum of 5000 I dont see it happening for the 2001-2004 cars.

I do have a rough price on the replacement system (box only no screen) and that comes in at $2kish loaded.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Also seen this as an option 
    • I get you, we’ll see I’m aiming for 200ish kw now and hopefully 300rwkw down the line after some upgrades maybe like headstuds, E85 flex fuel etc  so trying to make it final for that now, I can get a GTT airbox for $280 so it’s not too bad but not sure if there’s better ways to spend that money. I seen online they say pod filter which isn’t enclosed isn’t good especially for a plus T.      hard to say what to do
    • Meh. How much power can you make from a +T anyway? I wouldn't have though it would be enough to challenge the airbox. It's not as if it's tiny compared with the turbo one. As to putting a pod in a stock airbox .... it's not the filter element that would be restrictive. It would be the air inlet to the box that would be the narrow point, which you could open up regardless of what element was inside. On my R32 I opened up the sort of triangular opening in the bottom front corner of the box, deformed (heated, moulded) some 4" stormwater pipe to fit to that opening and punched a 4" hole down through the inner guard to the spot where the stock intercooler used to be. This was purely in the search for a cold intake, but you could do something similar if you need to open up the inlet side of it. The AFM tube size is the same for both NA and turbo, so the outlet from the airbox is same same anyway. If you're going to do the right thing, then an aftermarket ECU won't care about the AFM (ie, you can get rid of it). But even if it was still there, people pull >300rwkW through them all day, and I suspect you won't be going there.
    • R34 RB25de Neo by the way ^ 
    • Doing a +T on my car and I’ve read the precious forums lots of mixed reviews from sometime back.  checking if anyone has any ideas for airbox or enclosed pod filter or solutions?  I was thinking stock GTT box but some say it’s restrictive? I seen some people try fit in a pod in the box anyone done that recently?  not any good enclosed options ? Thanks 
×
×
  • Create New...