Jump to content
SAU Community

Recommended Posts

Hey guys/girls,

Recently Sold my Skyline... All Left over parts I'm selling for cheap as i don't care anymore.

Prices are firm but if you think they prices are unfair, feel free to shoot me a PM and we'll discuss prices.

All parts Located in Melbourne Western suburbs - Pick up only. Will Post interstate at buyers expense.

Contact me via PM or text/call me directly on: 0421 205 751

2x Front TANABE SUSTEC DAMPER Shocks and RSR Lowered Springs for R32.

These Shocks are in excellent condition and are Damper adjustable. Only have the front 2 sorry. - $250

2x Front OEM R33 Shocks

In good condition, no leaks or rust - $200

R33 S2 dash surround

Perfect condition no cracks or broken vents. - $60

R33 GTSt OEM BOV

perfect condition - $30

R33 GTR OEM BOV

Gread upgrade for GTST's.. works fine - $70

R32/33 GTR OEM adjustable strut brace

good condition - $100

R33 S2 GTST drive and passenger seats

Both seats comes with rails. Passenger seat has no damage. Driver has small rip. (see pic) - $120 for the pair

R33 S2 Spoiler

White, No damages. LED tail lights works fine - $60

R33 Right had side tail light.

No cracks on plastic. Needs clean. Comes with working globes - $60

R33 Stock actuator

Works fine - $30

R33 S2 Manual Turbo ECU

Works fine - $50

R33 Dual pillar pods - suits 60mm gauges

Sits flush, goes form roof to dash - $50

R33 Stock Turbo

Comes with actuator and elbow - has around 1-2mm shaft play in and out. other wise, works fine. - $250

6x 480cc side feed injectors for RB25DET (not NEO)

Bench flowed, tested and cleaned - $500

R33 Clutch master cylinder

works 100% comes with original lines. Slave cylinder not included. - $50

p3090727.jpg

p3090728.jpg

p3090721.jpg

p3090722.jpg

p3090723.jpg

p3090724.jpg

p3090725.jpg

p3090726.jpg

p3090729.jpg

p3090730.jpg

p3090731.jpg

p3090732.jpg

p3090733.jpg

p3090734.jpg

p3090735.jpg

Edited by Dush
Link to comment
https://www.sau.com.au/forums/topic/260308-skyline-parts-clean-out-melb/
Share on other sites

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

looking at the sustec damper shocks, how much for shipping to NSW 2640?

and they will fit R32 gtst? and how low are the springs? im running on 18's and they just fit under the well on the stock shockers

Thanks mate

Just an update of the Parts that are still available:

2x Front TANABE SUSTEC DAMPER Shocks and RSR Lowered Springs for R32.

These Shocks are in excellent condition and are Damper adjustable. Only have the front 2 sorry. - $250

2x Front OEM R33 Shocks

In good condition, no leaks or rust - $200

R33 S2 dash surround

Perfect condition no cracks or broken vents. - $60

R33 GTSt OEM BOV

perfect condition - $30

R33 GTR OEM BOV - SOLD

R32/33 GTR OEM adjustable strut brace

good condition - $100

R33 S2 GTST drive and passenger seats

Both seats comes with rails. Passenger seat has no damage. Driver has small rip. (see pic) - $120 for the pair

R33 S2 Spoiler

White, No damages. LED tail lights works fine - $60

R33 Right had side tail light.

No cracks on plastic. Needs clean. Comes with working globes - $60

R33 Stock actuator

Works fine - $30

R33 S2 Manual Turbo ECU - SOLD

R33 Dual pillar pods - suits 60mm gauges

Sits flush, goes form roof to dash - $50

R33 Stock Turbo

Comes with actuator and elbow - has around 1-2mm shaft play in and out. other wise, works fine. - $250

6x 480cc side feed injectors for RB25DET (not NEO)

Bench flowed, tested and cleaned - $500

R33 Clutch master cylinder

works 100% comes with original lines. Slave cylinder not included. - $50

Everything has to go.. so inquire within. =]

hey mate

have you still got the spoiler??

thanks

The Spoiler and Dash surround maybe sold. Just waiting for the guy to pick it up... If it falls threw. I will post it back up on this thread.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...