Jump to content
SAU Community

Recommended Posts

BBS LM 18X10 PLUS 20 WITH RE55S RIMS IN EXCELLENT COND TYRES USED $3000 WITH TYRES OR WILL SEPERATE

R34 GTR RIMS 18X9 PLUS 30 FORGED RIMS WITH CAPS ,NO TYRES IN IMMAC CONDITION NO GUTTER SCRAPES OR MARKS$2200

BRIDGESTONE RE050A 295X30X19 SUIT 33/34 GTR WITH 85% TREAD COST $780 EACH SELL $350 EACH OR A SET WHAT EVER YOU PREFER $1400 THE LOT. IF YOU DON'T NEED THEM TELL YOUR FRIENDS!!!!!

EXEDY SPORTS TUFF TWIN PLATE PULL TYPE USED FOR 1000KMS WITH FLYWHEEL COST $1800 MAKE A GENUINE OFFER TAKE THE CLUTCH

R34 GTR/GTT ALLOY RADIATOR STD CLEANED OFFERS, NEED TO CLEAN SHED

NARVA H1 GLOBES IN PACK 80% MORE LIGHT $40

R34 DIFFS FRONT AND REAR. V SPEC MUST SELL OFFERS

R34GTR STD CAMSHAFTS= OFFERS $$$$$

R34 GTR STD INSTRUMENT CLUSTER OFFERS$$$

ALL PARTS IN SYDNEY( SUTHERLAND AREA) ALL INTERSTATE BUYERS ORGANISE FREIGHT AND PICKUP AT OWN EXPENSE THANKS. PREFER PHONE CALLS ON 0412351418 OR TEXT OR PM THANKS BILL

Link to comment
https://www.sau.com.au/forums/topic/260365-r34-r33-gtr-parts/
Share on other sites

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...