Jump to content
SAU Community

Recommended Posts

hey can anyone recomend anywhere to take my car for a timing belt replacement. ive got 800km to organise it. i live in ipswich but im willing to drive if i need to.

ive got a series 2 rs4s stagea

thank you in advance

Link to comment
https://www.sau.com.au/forums/topic/260488-timing-belt-replacement/
Share on other sites

thanks, i have sent them an email.

is it just me or is there address no where on the internet. i must be going crazy.

As far as i can tell you are not crazy.I couldn't find an address either! I am interested in their location as i need a good workshop.

It is impossible to compare those 2 prices without knowing what is and is not included in each price. We have done plenty of timing belts on RB's and the price varies each time depending on what seals get replaced, the condition of the idler and tensioner bearings, if the water pump is done whilst the front of the engine is apart etc.

Best bet is to make a few calls (including one to us :)) and see what options you have and what back up service you receive. We offer a 100% money back guarantee on all of our servicing work.

I can do it for you, $200 plus parts. Im a qualified mechanic. i have built many RB engines including all of my own.

i highly recommend a gates belt and if your idler and tensioner make any noise at all they need to be replaced.

this is also the time to do the water pump as suggested before. also this is the time to check cam seals and front crank seal in oil pump

as they are easy to do while doing the timming belt is off.

Those thing's are hard to quote when you can come up against unexpected add-on cost I.G. water pump's, defective water hose's ect ect.

Like mercury said, they warrent all work done on vehicle, that's where alot of people go wrong, not knocking old mate who wants to do it for $200, but if something does go wrong, not saying it will, but WHAT IF, will you cover the cost of bent valve's or whatever may happen????????

It pay's to be safe, it pay's to do it by a professional with insurance background.

$400 plus parts is a fair price...considering the timing belt kit including the pulleys, belt etc is $280 makes Dan's quote just about spot on.

I know i wouldn't do it for less than that and if anybody quoting less than that to make a dollar it would have to be a rush job. Remember the cam belt is keeping your valves away from your pistons...a rushed job and error could be very costly.

Edited by DiRTgarage

just because its cheap doesnt mean its a rushed job, and yes if damaged was cause by my mechanical work then i would be liable for those

repairs, it was just an offer, remember i dont have overheads to cover like big workshops.

Im located at the Gold Coast.

We were not saying you do a cheap job, you properly have the same qualification's as most GOOD tech's out there, true about no overheads but doing job's like this can have its rewards and its down fall's if something were to go wrong.

I applause you for having a go thou, i know alot of tech's who wouldnt dare do this kid of work outside work hour, you seem very confidant and good luck.

WHITEY

just because its cheap doesnt mean its a rushed job, and yes if damaged was cause by my mechanical work then i would be liable for those

repairs, it was just an offer, remember i dont have overheads to cover like big workshops.

Im located at the Gold Coast.

your time is a valueable thing...i wouldnt charge peanuts to be away from my family or doing things like relaxing with a few coldies around the bbq with friends. If you are good at what you do don't short change yourself...charge accordingly. I dont have a big workshop or any overheads (my mate has a 4 bay shed i work out of and gets free labour on his street/circuit GTR for the favour) either.

this is not mean to be taken as a shot at you...just my opinion and maybe some advice.

i payed just under $1k not to long ago to get my belt, water pump, seals and idlers done. apparently took about 5-6hrs to do the job. to the mechanics reading this, did i pay more than i should have or does this sound resonable.

i payed just under $1k not to long ago to get my belt, water pump, seals and idlers done. apparently took about 5-6hrs to do the job. to the mechanics reading this, did i pay more than i should have or does this sound resonable.

Nope, has the car had any problem's???

And they properly charged out what the book said it takes to do, that's how you cover your workshop outgoings if something was to go overtime.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for all the replies fellas. Gonna finish putting it back together and see how it handles the set up. If it starts pinging it’ll be parked.
    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
×
×
  • Create New...