Jump to content
SAU Community

Inner West Crew Whoretown (toowong/st Lucia/kenmore/indooroopilly And Sometimes Sunnybank?)


Recommended Posts

pics of it with the xd9s on it shan?

nah, just sittin upstairs in the shop for now lookin pretty. waitin on tas to get back to me on prices for Dmax 30mm flared fenders.

nah, just sittin upstairs in the shop for now lookin pretty. waitin on tas to get back to me on prices for Dmax 30mm flared fenders.

f**k yehhh, thatll b sexy as, i think tas is currently in talks with the jap dmax :)

woooooooooo

got some random mish mash of colours tho... i wanna get em powdercoated white. they don't make em in 10" +12 any more :)

Dave's underbody is almost as sexy as his underbody *wink wink*

hahah. thanks for all the help man. okay UPDATE bitchezzz thanks to some hard work from josh, we accomplished this finally today.

prepping for etch primer:

P9030001.jpg

---

P9030002.jpg

after etch:

P9030004.jpg

---

P9030005.jpg

and just managed to do a test run of my seam sealing skills, before calling it a day.

P9030006.jpg

hope it don't rain tomorrow, start work on the engine bay :D plus ill post up a pick when i pickup my rims from getting christened with its first set of rubber.

Managed to get it to stay on its side did ya?

yeah that drum is holding it on its side, it was scary unbolting the front support to paint.

Looks good! Maybe you should take a full month off work to finish it!

a month, thats the total im aloud in a hole year. :down: have to wait till after chrissy i get 3 weeks.

Rains are comming Dave, starting to spit at my shack.

why did i just think of you eating corn and yelling out "ma ma the rains r here"

umm looks pretty scary outside, ive covered her all up. hope the plastic dont leak :D

and i just got a surprise from a nock on the door.

TADA !!!

P9040001.jpg

anyone wanna buy a gtr for gtst front bar - CALLING TAS !!!

why did i just think of you eating corn and yelling out "ma ma the rains r here"

umm looks pretty scary outside, ive covered her all up. hope the plastic dont leak :D

Becuase, deep down I am kinda bogan?

If Taz buy's that bar I will buy the type M bar ^_^

Saves me painting my black type M one.

John, PM me your mobile number so I can make the promised phone call tomorrow night

aiight... but if you throw off my :( rhythm... so help me... :D

Edited by Isola
what front bar are u usin dave? or did u buy that gtr shell?

gtr for gtst. havent looked at the shell, has come at the wrong time. ill probably ring the dude end of year see if hes till go it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...