Jump to content
SAU Community

Inner West Crew Whoretown (toowong/st Lucia/kenmore/indooroopilly And Sometimes Sunnybank?)


Recommended Posts

Dear Dave,

untitled212.jpg

seen it mate, got photos of it sliding to, but i'll raise by not 1 but 2

79904802_full.jpg

1JZ-fitting-13.jpg

^^^ this is my inspiration to my next 32

and as for that fuel pump i got a $10 solution for ya in my pile.

seen it mate, got photos of it sliding to, but i'll raise by not 1 but 2

79904802_full.jpg

1JZ-fitting-13.jpg

^^^ this is my inspiration to my next 32

and as for that fuel pump i got a $10 solution for ya in my pile.

haha yeh I saw his drift pics.

I'd buy it, even just as a tester, but I cannot get out to get it. My car is garage bound, end of my street and it dies. I can get to toowong shopping centre by city cat, about as far as I can go

haha yeh I saw his drift pics.

I'd buy it, even just as a tester, but I cannot get out to get it. My car is garage bound, end of my street and it dies. I can get to toowong shopping centre by city cat, about as far as I can go

i could bring the pump somewhere and meet you? try get as far as you can with ur 32 and we'll replace the pump on the side of the road LOL.

i could bring the pump somewhere and meet you? try get as far as you can with ur 32 and we'll replace the pump on the side of the road LOL.

:thanks:

Too broken haha. Let me know when your finish work and i'll see if there is a city cat running to toowong

Hey Colin,

You know how you hate me and stuff? Well... I just went to McDonalds... and wound up having the counter girl for dessert :worship::(

You picked up at Maccas.....wow..

Maccas...

If it was Hungry Jacks, then hi 5 time, but Maccas. :worship:

+1

The chick on the drive through at HJs was a stunner. No desert for me though :yes:

Thats because you drive a skyline, if you had a commy with fully sick chrome wheels and 15 subwoofers then she would have been out the window like a flash.

*sigh*

T88 install update:

- Fuel filter looked fine

- There is some grit in the tank, not enough to warrant pulling the tank out

- Fuel pump is the original item still had all factory seals

The pump filter that sits in the thank is brown and had gritty alloy looking rubbish on it (I assume from the alloy nozzles at fuel stations. I'm hoping it's just a case of a 20 year old pump :yes:

Now taking bets I might have f**ked something

- Standard one way valve after the fuel filter, before the injectors perhaps?

Dave:

As far as I know my car still has the AUTO ecu, do you have one of your manual ones you can check the numbers on?? I have no idea what numbers you need (if you know let me know and i'll get my ones).

If i do indeed still have the auto one.. I'll take one of those manual puppies too

looks like you found me... good start.

friends suggestions for everyone else sent to you.

I don't have any bloody pics! Nice little 18 year old emo bitch. Fun times.

No pics, it didnt happen

yeah i found most of you from the BR page :yes:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I think he was only proposing to use the wire, not the sender. Simply because it runs from the right place to the right place. Personally, I wouldn't hack up the factory wiring like that. I'd just lay in the Defi loom.
    • From memory it wasn't too hard to simply see which wire ran where when you plug that in. Unfortunately also from memory the OEM sender does not use the same configuration 99.9% of gauges run. So in other words if you connect the signal wire that was running to the OEM gauge to your DEFI gauge you might find your oil reads at 200C or some other incorrect value. I remember having the same line of thought and then running new wires/senders to match the gauges I have. The pinout is available in the R34 workshop manual.
    • Does anyone on here know which wire on the GTT triple gauge pod harness is for the oil temp gauge? my sensor works fine but I upgraded the gauges to DEFI advance. And if I can simply piggyback off the oem oil temp wire to the Defi oil temp sensor wire that would make life so much easier. 
    • Even face her a wash now that’s it worth more than my house
    • This was what I was invisioning, or Pete cutting a beer can up and hose clamping it around the catch can! Ha ha ha
×
×
  • Create New...