Jump to content
SAU Community

Inner West Crew Whoretown (toowong/st Lucia/kenmore/indooroopilly And Sometimes Sunnybank?)


Recommended Posts

cheers, I always lol when people think that an s13 is in some way slower and less capable than a r33

That's unfair though, 33s are boats.

S13s certainly plough a field better :)

they're a good engine, shame about the noise (and lack of cylinders)

yeah the noise can be ok with bigger turbo and decent exhaust, the more its muffled the worse it is lol, will never sound as good as a RB though...as for lack of cylinders pfftt 86mm x 86mm goodness, its the goldern ratio for revs vs torque,any more cylinders and you would end up with a silly little thing that doesnt make peak torqe till 6400rpm! :)

I love tractors now, i am seriously considering ditching the GTR when its rebuilt and focusing my efforts on the sil80

tristan likes this a lot, a hell of a lot :)

yeah the noise can be ok with bigger turbo and decent exhaust, the more its muffled the worse it is lol, will never sound as good as a RB though...as for lack of cylinders pfftt 86mm x 86mm goodness, its the goldern ratio for revs vs torque,any more cylinders and you would end up with a silly little thing that doesnt make peak torqe till 6400rpm! :)

yeeh will never be as good as rb - but can sound tasty, oh and epic sr flutterzzzzzz

:) i was joking

dave and i just re did my zorst to sort out all the epic leaks - we used that high heat gasket goo and gaskets

:)

Don't spose you know what the standard "3inch" gasket part number is? I CBF tracing the flange's and taking it in to super cheap

:)

Don't spose you know what the standard "3inch" gasket part number is? I CBF tracing the flange's and taking it in to super cheap

dave has it :)

does this mean the junker is coming out? not out of the closet - just out thursday?

dave has it :)

does this mean the junker is coming out? not out of the closet - just out thursday?

Depends..

I haven't order'd a de-pu$$y pipe yet, because I dunno if it well sell today on ebay, plus i CBF fitting the front pipe myself

I don't bother with any gasket goo or anything with exhaust gaskets...

just go into rapeco and ask for a standard 2 (or 3 if thats what you need) 3" exhaust gasket. They'll find it for you. Or an exhaust shop

Depends..

I haven't order'd a de-pu$y pipe yet, because I dunno if it well sell today on ebay, plus i CBF fitting the front pipe myself

i opted to be a pussy instead of getting a de-cat :)

i like that you're keeping it hahaha :) (or at least thinking about it)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • If your tuner can't make the car idle like factory, I'd get a new tuner. These injectors are fantastic and I'd have very serious concerns about a tuners skill set if they couldn't get them to idle well. 
    • It's highly likely you will find something. Alternatively, a quick design and order online from chaina and you'll have a perfect solution
    • Idle Lambda target is off by .4 but I reckon the VE table is not correct. If my tuner has no issue using these injectors I will keep them, they are good quality after all
    • I already have an Apexi. Just wondering if it is worth putting in something new since the Apexi is likely well over 10 years old, if not 15. I know the injectors work but they already run at less than rated fuel pressure to make them work properly and idle is basically 1% duty cycle or less. Could be better
    • Nice, I would never have thought in that direction. The actual motor is a cylinder....I wonder if there are any cylindrical heat sinks with the right ID  (and if there is clearance to other components). I think adding airflow is still a thing as well....will check it all out next time it is in the air. Wish I had a hoist...
×
×
  • Create New...