Jump to content
SAU Community

Inner West Crew Whoretown (toowong/st Lucia/kenmore/indooroopilly And Sometimes Sunnybank?)


Recommended Posts

Most shops are not specialists in 31's or 13's. SOooooooooooo Chances are you'll pass easily.

You boys hsould just get a mobile roady guy to do it for you. They care not for such discrepancies

R31 tie rod ends into S13 spindles looks spectacularly dodgy. You either have a castle nut with no split pin in it, or an upside down caslte nut, either way you don't get many threads on it. Thats the sort of thing I would expect to fail a RWC, but hey, I may be wrong :banana:

be careful where you say that... that's enough to be stripped of your 31 club membership :P

Not if he re-uses oil and a filter from his GTR or something

Anyone who's not working/busy on Thursday and wants to come on this drive:

timeforaroadtrip.jpg

let me or Jason know. We'll be leaving from the BP at Aspley at 9am.

hmmm... might take a 'strayen day...

R31 tie rod ends into S13 spindles looks spectacularly dodgy. You either have a castle nut with no split pin in it, or an upside down caslte nut, either way you don't get many threads on it. Thats the sort of thing I would expect to fail a RWC, but hey, I may be wrong :banana:

Not if he re-uses oil and a filter from his GTR or something

hmmm... might take a 'strayen day...

GTR filter didnt fit :P Had to use an old one of dads...

Yeah tie rods will look dodge. I'll see if I can find a rubber cover for the castle nut lol

looks like a decent drive, but I will have to sort out my camber a bit before i do any fun runs, as the tyres scrub lightly on hard corners.

Man up. My tires scrub heavily on light corners, doesn't stop me :P

looks like a decent drive, but I will have to sort out my camber a bit before i do any fun runs, as the tyres scrub lightly on hard corners.

so do mine. I usually just steer with the back end instead.

The noise drives me nuts though.

And having 225's on 10 inch rims, I really don't have much confidence in the tyres staying on the rim if I corner particularily hard

I might get some gtr guards though, so will be able to put decent sized rubber on the fronts

ps. still got the flu, so another day of ps3. got god of war last night, so will give that a workout. just gotta summon up the energy to go for a bourbon run...

Anyone who's not working/busy on Thursday and wants to come on this drive:

timeforaroadtrip.jpg

let me or Jason know. We'll be leaving from the BP at Aspley at 9am.

skip the boring highway bit...

Go from Aspley up through Petrie, head to Dayboro and then over Mt Mee...

This will bring you out at Woodford...

This way you skip all the boring highway bits and Mt Mee is an awesome ride/drive...

As from Woodforf the rest is good stuff, out to Kilcoy down the back of sommerset and over Mt Glo & Nebo and home...

Looks like my average northside Sunday ride...

skip the boring highway bit...

Go from Aspley up through Petrie, head to Dayboro and then over Mt Mee...

This will bring you out at Woodford...

This way you skip all the boring highway bits and Mt Mee is an awesome ride/drive...

As from Woodforf the rest is good stuff, out to Kilcoy down the back of sommerset and over Mt Glo & Nebo and home...

Looks like my average northside Sunday ride...

+11ty. I didn't look at it that hard, I just assumed it was going through mt mee. Definitely go that way mangs

Anywhooo

Got to go to work... the boss man probably wonders where i am...

Leaving for Townsville this afternoon for a week at the V8's woot woot.... :P

See you peeps Tuesday next week...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Was that with the cas upside or correct way up?
    • Did and sync timing with light 
    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
×
×
  • Create New...