Jump to content
SAU Community

Inner West Crew Whoretown (toowong/st Lucia/kenmore/indooroopilly And Sometimes Sunnybank?)


Recommended Posts

Where do people get their licenses from? I nearly got hilux'd this morning crossing the road. Farrk

Same place the Asian chick in a white Getz I saw on my way to work did. She turned left while indicating right... WTF!?!?

Morning Mangs

Yet to be pulled over, or even had a second look. Could be due to when and where i drive, but i think its mostly because the car's bog stock.

I don't get pulled over too often, do get looked at and followed a lot though.

Can some one give me a playing contract so I can go out and muck up and get kicked out of the club. Oh and still get paid out $1mil on leaving.

I will give you a $1/year contract to play the banjo. If you muck up and get kicked out of a club, termination payment will be $1.

Only catch is you have to be good at playing :thumbsup:

That's what she said

Sarp mangs. Sore throat is not so sore. Winrar!

Did the lube help?

fark missed a page :(

3rd last day today. Ducking out early however :)

I'm a big fan of ducking out early

hai guys :action-smiley-069:

so much ot do this week again....

McMarty, get the rom off the board yet?

hai Scottai. Nope, too hard. Did you buy the special tool thingo you were talking about?

Where do people get their licenses from? I nearly got hilux'd this morning crossing the road. Farrk

Wheat Bix packets. Getting hilux'd can't be good.

Same place the Asian chick in a white Getz I saw on my way to work did. She turned left while indicating right... WTF!?!?

*headsplode*

Where do people get their licenses from? I nearly got hilux'd this morning crossing the road. Farrk

It comes with the car I'm guessing...

Same place the Asian chick in a white Getz I saw on my way to work did. She turned left while indicating right... WTF!?!?

I've seen this all too often

hai Scottai. Nope, too hard. Did you buy the special tool thingo you were talking about?

Heading down to Jaycar this arvo. Or if you're not fussed on keeping the standard ROM, cut the legs. It will make it hella easy.

I will give you a $1/year contract to play the banjo. If you muck up and get kicked out of a club, termination payment will be $1.

Throw in a piece of straw and overalls, and I'll start negotiations with the sister/wife.

hyuck hyuck

Where do people get their licenses from? I nearly got hilux'd this morning crossing the road. Farrk

They don't. They spend all their money on $100,000 cars with custom plates and forget to buy driving lessons and indicators.

They don't. They spend all their money on $100,000 cars with custom plates and forget to buy driving lessons and indicators.

For sale, one set of BMW/Merc/Lexus indicators. Never used, current owner is stuck so far up their own ass that they think that everyone should give way to them automatically in all situations. Will swap for in car entertainment system so I can be even more distracted while running the kids to school.

  • Like 1

I've seen this all too often

That's what she said.

Heading down to Jaycar this arvo. Or if you're not fussed on keeping the standard ROM, cut the legs. It will make it hella easy.

Out of curiousity, link to said tool at Jaycar?

I couldn't care less about the the stock ROM. I did think of cutting the legs off, but my side cutters don't seem to be able to manage it :(. I might trying going in from the 'top' instead of the 'side', if that doesn't work I might just get the dremel out...

Throw in a piece of straw and overalls, and I'll start negotiations with the sister/wife.

hyuck hyuck

A piece of straw I can maybe manage but overalls? C'mon man, I drive a 31... I can't afford overalls.

They don't. They spend all their money on $100,000 cars with custom plates and forget to buy driving lessons and indicators.

If I bought a $100,000 car, I'd want it to come with indicators. Just sayin...

For sale, one set of BMW/Merc/Lexus indicators. Never used, current owner is stuck so far up their own ass that they think that everyone should give way to them automatically in all situations. Will swap for in car entertainment system so I can be even more distracted while running the kids to school.

I'll give you a fish tank and a mountain bike inner tube.

3.5 hrs

Impressive.

They don't. They spend all their money on $100,000 cars with custom plates and forget to buy driving lessons and indicators.

How do you blind an Asian?

Put a windscreen in front of her

Out of curiousity, link to said tool at Jaycar?

I couldn't care less about the the stock ROM. I did think of cutting the legs off, but my side cutters don't seem to be able to manage it :(. I might trying going in from the 'top' instead of the 'side', if that doesn't work I might just get the dremel out...

No idea on the link. Just gonna roll down there and hope for the best....

I was trying to keep the ROM intact!! If you had of said not to worry, I would have cut the legs off it!

No idea on the link. Just gonna roll down there and hope for the best....

I was trying to keep the ROM intact!! If you had of said not to worry, I would have cut the legs off it!

+1 cut legs off with dremel.

Or you can use a heat gun on the reverse side but you need to make sure you concentrate the heat onto the rom and not the surrounding chips

No idea on the link. Just gonna roll down there and hope for the best....

Furry muff... I'm just keen to see what sort of tool you have in mind...

I was trying to keep the ROM intact!! If you had of said not to worry, I would have cut the legs off it!

Dow! Communications breakdown :(. If I give it back to you on tursday and tell you it's OK to cut the legs off, how soon can I have it back finished? :)

+1 cut legs off with dremel.

A supporting vote from the allmighty Dan? Sounds like a goer.

Or you can use a heat gun on the reverse side but you need to make sure you concentrate the heat onto the rom and not the surrounding chips

Not so keen on that technique... i'd cook something else for sure...

Annoying thing is I've desoldered heaps of ICs before just using my soldering iron and a solder sucker... this one's just being a right prick for some reason.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...